Is mesopores like that of porous carbons?
Well. It depends on the material and its modification. Cobalt(III) oxyhydroxide is capable to have the analogous pores.
Dear Harb,
It is tottaly depending on the method of production and choice of method.
hope that helps
regards
engin
well for my knowledge it is depend on your arrangement of your materials with Ni or Co. but MOF material is good for the porosity and enhance the property of supercapacitor.
Surface area is the major factor.
Supercapacitor/solar cells integration, materials and structure. Materials for solar cells. Different structures.
08 September 2018 5,001 2 View
organic nano antenna
07 August 2018 6,904 4 View
Hi all, anyone publish in IEEE Electron Device Letters? Is this good for material science? free of charge?
01 February 2018 2,970 2 View
Infrared sensor and piezogenerator on the same chip
31 December 2017 5,318 2 View
which journal is good with respect to editors and reviewers (as my research in supercapacitor for energy and i am specialized in electronic engineering not chemical) ? J of power sources, carbon,...
09 October 2015 7,901 1 View
Any one wok on this point?
01 January 1970 4,316 2 View
Perovskite used in sensor applications.
01 January 1970 9,673 1 View
like with polyaniline doped with acids
01 January 1970 2,821 2 View
SEM
01 January 1970 8,060 0 View
pervoskite
01 January 1970 8,986 0 View
Hi, I am using GROMACS 5.1.4 to simulate water in contact with a surface. I am only interested to calculate some properties of water near the surface. Let's say at a distance of x nm from the...
03 March 2021 9,989 2 View
When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...
03 March 2021 4,892 5 View
We have synthesized various metal complexes with different environment around the metals. Now to see the application of synthesized complexes we need this study also. we are also interested in...
01 March 2021 1,899 2 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...
28 February 2021 7,397 8 View
I would like to synthesize a transition metal doped TiO2 via solgel method. Hence, I would like to know which metal salt precursor to choose among Chloride, Nitrate, and Sulphate. A clear...
27 February 2021 4,285 3 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View
I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....
24 February 2021 4,428 3 View