water as solvent in organic reaction and chromatography?
In GC we use volatile solvents or easily volatilized solvents. Additionally, water needs 100°C for boiling, hope your components not degradate before reaching 100°C.
In HPLC, it depend to the polarity and affinity
Effect of moisture in the purity of organic compound.
06 July 2017 8,345 5 View
Is that any type of bonding or any sorption process occur between nano particle system and chitosan or natural compound.
06 July 2017 7,594 2 View
After synthesis of ionic liquids how can we measure the bonding type between them. Is any specific technique for this or it determine by chemically?
01 February 2017 2,566 0 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...
11 August 2024 9,801 2 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
Hello experts, Does anyone know any free software about retention index prediction ?
08 August 2024 7,403 2 View
I'm working on selecting antibodies against a recombinant protein that has a His-tag. My idea is to first bind the recombinant protein to a HisTRAP column and then use this column for an affinity...
07 August 2024 505 3 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...
06 August 2024 4,953 0 View
Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?
06 August 2024 980 5 View