Unable to get ECG samples at 256 hz frequency in Aurdino. I am doing changes in delay, still getting only 60 samples. what could be the reason ?

More Resham Arya's questions See All

Shortage Cost Hypothesis?

What can be a hypothesis related to the Stock out Cost or Shortage Cost?

29 July 2024 9,259 2 View

What are possible sample selection biases in Logit model estimation?

I randomly interviewed 250 poor people and 250 non-poor people. Considering 1 for poor and 0 otherwise, does estimating a logit model aiming to capture the probability of becoming poor make sense?...

02 June 2024 2,326 2 View

How to determine the exact quantity of elements present in the biomass ?

I want to know for doing EDX analysis to examine the elements present in the biomass, should I do the first pyrolysis or directly do the powder sample analysis? which one is the most favorable?...

16 May 2024 7,883 2 View

Hi, I am looking for a computation tool to predict the formation/ of organic compounds when we heat different plants in a controlled combustion?

I am working on a project where we are looking for a computational tool to explore the occurrence of combustion products (organic molecules) when heating different kinds of plants in a controlled...

14 May 2024 561 1 View

How to read reduction potential from cyclic voltammetry plot for reduction peak and how to use this potential for calculating ERHE potential?

I want to interpret the data for the cathode catalyst analysis from the cyclic voltammetry curve therefore I want to know how to read the reduction potential for the oxygen reduction reaction. And...

01 April 2024 7,363 1 View

How to select geographical location of samples (defined sample size) for a primary demographic survey?

The primary survey is meant to analyse the social vulnerability status of the population, where sample size is defined at taluk level of the district (study area). Considering factors like...

05 March 2024 6,919 5 View

Conductive Ink using CNT/ graphene/ nanoparticles?

Hii, Can anyone please suggest articles for preparation of conductive ink using CNTs/graphene/ nanoparticles, etc.?

22 February 2024 7,694 2 View

Is it possible that Phage elisa data is good but there is no consus agreement in sequencing data? plz help me out?

Hi everyone. I work on Phage display on some protein . I send some sample for sequencing after round 3 and 4 for Phage DNA sequencing. Before sending sample, I check ELISA and data was good like...

08 November 2023 7,339 0 View

Retention rate vs Cycle no., at higher current density the capacity retention was higher than at lower current density. Is it possible?

For transition metal hydroxide based electrode materials, up to 500 continuous charge-discharge cycles, we have obtained that at 2 A/g current density, the capacity retention was higher than at 1...

12 September 2023 6,374 3 View

Does anyone have a PLA emulsified Agar media protocol for PLA other than Natureworks ?

I have tried multiple protocols with varying ratios of DCM and SDS but was not successful in preparing PLA emulsified Agar media. Problems faced , 1. Plates are too transparent to see any...

27 July 2023 839 2 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

What may be the reasons for failures of Tube toi Tube Sheet Joints in Boiler Drum ?

We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.

08 August 2024 3,161 0 View

What is the problem with these tissue culture plants?

All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.

01 August 2024 589 4 View

Dataset of synchronized cardiac angiography and ECG?

Hello, I'm working on medical project and I would need synchronized angiography with ECG? Does anyone know if some open source dataset of this kind exist? Regards, Bruno

25 July 2024 2,214 2 View

Reason for discontinuities in my Band structure?

Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...

25 July 2024 2,920 11 View

Is it fare for editors of reputed Journals to put on hold manuscripts more than six months without review updates, Are they harassing researchers?

It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...

24 July 2024 8,596 2 View

Has anyone tried freeze flow samples in -80C freezer or liquid nitrogen before processing?

Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...

15 July 2024 9,975 1 View

My Cyclic voltammetry curve doesn't show cathodic peak of Cu2+ to Cu+. how to solve this problem?

I performed CV of Cu-MOF in a buffer solution of pH 8, and we did not find any peak corresponding to Cu2+ to Cu+. What is the reason behind this? Please give your valuable suggestions.

08 July 2024 2,388 4 View

Hello, I’m growing three species of microalgae under heterotrophic and mixotrophic conditions. Both the two turned yellow?

What could be the reason for mixotrophs to be yellow too instead of green? Thank you

08 July 2024 594 2 View

What are possible reasons for having the repeated wavy patter in Raman spectrum?

I'm currently analyzing the Raman spectra of coloured plastic samples and have encountered a wavy, oscillating pattern in the spectra of some coloured samples. I was wondering what the possible...

04 July 2024 1,949 4 View

Resham Arya

Did anyone face the same issue?

Fehmi Özel

which did you used baud rate for serial comm? Please provide code part

Vasile Zoicas

Hi,

There is maybe a confusion between sampling frequency an number of samples/sec.

If you want 250 samples/sec, you need at least 250 Hz sampling frequency.with at least 14 bits/sample. Check as well the coding scheme....

Cheers,

Vasile

Alok Kumar Bharti

By the use of FFT in machine you may be able to get ECG sample