Are there any papers concernning uplift forces in composite steel-concrete beams, for example from crane beams attached to the steel beam only, and its interaction with the shear forces?
Dear Bartosz, I hope this article help you.
https://www.researchgate.net/publication/313793907_The_Effective_Width_in_Composite_Steel_Concrete_Beams_at_Ultimate_Loads
Dear Mohannad,
This article is not about tensile forces in shear connectors.
Best Regards,
Bartosz Grzeszykowski
Dear Mohammed,
Thank You for the paper,
Dear Bartosz,
I recommend the following paper. Maybe it can be useful.
Bonilla, J.; Bezerra, L. M.; Mirambell, E.; Massicotte, B. (2018): Review of stud shear resistance prediction in steel-concrete composite beams. Steel and Composite Structures, Vol. 27, No. 3, Korea, ISSN: 1229-9367, E-ISSN: 1598-6233, p. 355-370. doi: 10.12989/scs.2018.27.3.355.
If you do not have it, you can make me the request. It is one of our recent works. Best regard,
Prof. Jorge Bonilla
Does anyone have a digital copy of Johnson's book: Designers’ Guide to Eurocode 4: Design of Composite Steel and Concrete Structures: EN 1994-1-1 and is willing to share?
31 December 2017 6,203 1 View
In the Eurocode 4 in the paragraph regarding beams: 6.2.1.2(1) Plastic resistance moment Mpl,Rd of a composite cross-section it is written: b) the effective area of the structural steel member...
31 December 2017 1,789 4 View
What is the relation between the elastic modulus of concrete in tension and in compression? In early days (up to 10 days from casting) and after 28 days? Any papers?
03 April 2017 3,080 7 View
Does anyone have a scientific explanation to the fact that why reducing the mesh size in Abaqus/Explicit leads to unstable results and worse agreement with the experimental results? In this...
01 January 1970 884 9 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...
08 August 2024 4,842 0 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
Please can anyone support with the survey questions based on RQ measures and propose how to do it in FMCG industry and include as well the role of brand equity Thanks
06 August 2024 949 0 View
How to design VN primer to attach with universal reverse primer
05 August 2024 2,116 3 View
Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)
03 August 2024 8,538 4 View
How do you tie-break and rank these two in their strength?
03 August 2024 4,471 1 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
What is the role of oxidative stress in toxin-induced carcinogenesis? I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from...
02 August 2024 3,174 1 View