01 January 2018 1 6K Report

Does anyone have a digital copy of Johnson's book:

Designers’ Guide to Eurocode 4: Design of Composite Steel and Concrete Structures: EN 1994-1-1

and is willing to share?

More Bartosz Grzeszykowski's questions See All
Stress-strain curves for concrete and steel in composite steel-concrete beams and slabs?

In the Eurocode 4 in the paragraph regarding beams: 6.2.1.2(1) Plastic resistance moment Mpl,Rd of a composite cross-section it is written: b) the effective area of the structural steel member...

31 December 2017 1,789 4 View

Tensile forces in shear connectors in composite steel-concrete beams?

Are there any papers concernning uplift forces in composite steel-concrete beams, for example from crane beams attached to the steel beam only, and its interaction with the shear forces?

10 November 2017 8,642 4 View

What is the relation of the elastic modulus of concrete in tension to the elastic modulus in compression?

What is the relation between the elastic modulus of concrete in tension and in compression? In early days (up to 10 days from casting) and after 28 days?  Any papers?

03 April 2017 3,080 7 View

Unstable solution for fine mesh in Abaqus/Explicit?

Does anyone have a scientific explanation to the fact that why reducing the mesh size in Abaqus/Explicit leads to unstable results and worse agreement with the experimental results? In this...

01 January 1970 884 9 View

Similar questions and discussions
Can we mark 'EFL Learners shifting from general digital to AI technologies' as technological transition?

After COVID-19 it has seen that EFL learners technological affiliation has raised. In addition, in the post-COVID period learners started to engage AI technologies like ChatGPT while learning...

08 August 2024 8,964 4 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Do you know any references for analyzing stochastic fiber orientaion composites ?

Hello everyone I am looking for one or some books for propertes and behaviors of stochastic fibre orientation composites. unfotunately I could not find any suitable reference for thias by...

04 August 2024 3,461 3 View

What are the limitations and challenges of using machine learning for predicting concrete compressive strength in practical applications?

Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...

03 August 2024 2,546 2 View

La animación digital en plataformas digitales?

Hoy la animación se utiliza como una tecnología multimedia con gran potencial educativo, que va mucho más allá de sólo crear figuras, ya que puede promover una mejor comprensión en...

01 August 2024 7,186 0 View

Where to download DEM from 2018?

I am currently working on validating land subsidence results obtained using SBAS InSAR. Could anyone suggest reliable sources or repositories where I can download a historical DEM from 2018?...

31 July 2024 9,757 3 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

Recent topic in digital banking?

i need a recent digital banking topic for doing my Ph.d research

29 July 2024 5,210 2 View

Are you interested in contributing a book chapter on biomaterials in Orthopaedics?

I am editing a book for Springer Nature on recent advancements and future trends in biomaterials for orthopedic and trauma applications, with a publication date slated for early next year. If you...

29 July 2024 5,015 9 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close