can anyone guide me in simulating surface and groundwater. I was wondering which software and how could I use for simulation of surface and groundwater.
any paper or reference please.
Dear Mohammad
For simulation of both surface and groundwater a fully integrated model that can be used is "HydroGeoSphere". I used the previous version about 3 years ago and it was very effective in simulation of an integrated (surface and groundwater) system.
https://www.aquanty.com/hydrogeosphere
"HydroGeoSphere (HGS) is a three-dimensional control-volume finite element simulator which is designed to simulate the entire terrestrial portion of the hydrologic cycle."
Good Luck
Pirouz
Dear Signal,
SWAT and MODFLOW are very recommended.
With my best regards
Prof. Bachir ACHOUR
I agree with Dr. Bachir, it is SWAT and MODFLOW, both are widely used.
Dear Mohammad
For simulation of both surface and groundwater a fully integrated model that can be used is "HydroGeoSphere". I used the previous version about 3 years ago and it was very effective in simulation of an integrated (surface and groundwater) system.
https://www.aquanty.com/hydrogeosphere
"HydroGeoSphere (HGS) is a three-dimensional control-volume finite element simulator which is designed to simulate the entire terrestrial portion of the hydrologic cycle."
Good Luck
Pirouz
- Badges
- Science topic