Resources for learning Jade5 Software for XRD analysis?

01 January 2014 1 5K Report

I want to learn Jade5, which is used in XRD analysis. Is there any soft copy books or references? Also, it would be good to have tutorial videos.

Edward Andrew Payzant

Jade is commercial software from Materials Data, Inc. Version 5 is pretty dated (version 9.5 is current). You can find tutorials and user guides online, but perhaps you should contact the vendor directly: .

A quick search revealed "free downloads" of older Jade 5 from various websites, but to my knowledge the program, even the older releases, are not free software. I would strongly discourage you from using pirated versions of this software, if that is what they are.

Badges
Science method

More Khalid Tayeb's questions See All

Does anyone know how to obtain a coat of 3 Y-YSZ around powder particle surface using Rotary CVD?

Rotary CVD is a process to coat powder particles surface by smaller particles. I want use method to make a coat of 3 Y-YSZ around another powder particles surface, but I need to know 1. The...

06 July 2015 6,477 2 View

How can I mix two different ceramics powders via ball milling without reducing particles size?

I want to mix two different ceramics powders using ball milling machine. In the same time I need not any reduction or reducing in particles size. How can I do that? I have some suggestions: 1. Use...

03 April 2015 9,817 17 View

I want to synthesize nano powder with an average size of about 20 nm. Which test or device can I use to measure the size of the powder particles?

Thanks in advance for your replies.

02 March 2015 1,581 10 View

What does the term matrix mean in ceramics?

I had read many books and articles about ceramics and synthesis of ceramics powder and composite materials. I found the term matrix many times but I couldn't understand what is it and how can it...

31 December 2014 712 11 View

Does anyone deal with sintering of 3Y-YSZ nano sized particles?

I had sintered many samples prepared using 3Y-YSZ nano size powder by PAS machine. SEM results for all samples showed an unusual microstructure. Also EDS detected that Cl is one of the...

31 December 2014 6,103 7 View

How can I calculate fracture toughness?

It is well known that fracture toughness can be detected using special devices and instruments. But if I want to calculate fracture toughness [for ceramics materials] from hardness test instead of...

11 December 2014 2,682 6 View

How do you add PVA to ZrO2 Y2O3 and then remove it?

I want to add polyvinyl alcohol (PVA) to ZrO2 Y2O3 powder in order to make it more coherent. How much PVA can I add to the powder and how can I mix them together? Can I use a ball milling machine...

11 December 2014 3,481 3 View

How can I functionalize ZrO2 - Y2O3 powder particle surface?

I want to coat ZrO2 - Y2O3 powder particles by the smallest particles. How can I functionalize the powder particle surface in order to coat it?

11 December 2014 2,373 6 View

How can I make a thin film of ZrO2 Y2O3 using tape casing process?

Hi all! I want to produce a thin film of ZrO2 Y2O3 3% mol Y using tape casing process, but I don't know which are the materials that must be added and the composition of each material. Does any...

10 November 2014 9,866 2 View

How can theoretical density be calculated?

My research is in ZrO2 Y2O3. I want to calculate the theoretical density of this material, but I do not know how I can exactly calculate it. There are different methods which you will find them...

04 May 2014 2,120 18 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View