or you built it your self

or Luz Chem from Tito Scaiano cn probably sell you one.

I think Aldrich catalog also have them

good luck for your experiments. Starting on photocatalysis?

What type of UV lamp? If you are not using UV below 300 nm, a borosilicate glass (Pyrex) reactor would be OK. Much cheaper glass, and any scientific glassblower can make one for you.

Of course .... We use lamps in contact to the solution t oavoid any cut of from comon glass ... And glassbower do us the reactor

may be this study could be useful!

https://www.researchgate.net/publication/230556760_A_simple_procedure_to_quantitatively_assess_the_photoactivityof_titanium_dioxide_films

Article A simple procedure to quantitatively assess the photoactivit...

Dear All,

Till today we were using a photocatalytic reactor designed by us but at present we can not fabricate the same here.

Thanks for your reply.

Dear Anabela Oliveira,

luz chem and sigma aldrich do not provide such type of photocatalytic reactor, but thanks for response as i come to know another type of photo reactors.

https://www.uv-consulting.de/index.php/cat/c16_Laboratory-Reactor-Systems.html/XTCsid/1da2tqbj0vtk77ughkboq69ns48ljidn

Here are photoreactors from Heraeus company.

But I have used simple self-made jacketed glass reactor (230ml) with immersible UV lamp (PenRay) from UVP (http://uvp.com/mercury.html ).

Dear michal,

thanks for your link, i think this reactor setup will be more appropriate for my work

Here are more technical data

http://www.uv-consulting.de/english/products/photochemistry/laboratory-reactor-1/laborreaktorsysteme.html

Thanks all

www.lelesil.com tejas 8080080424 we offer quartz photochemical reactors from 20ml to 200 Liters with UV , Visible & Xenon Light Source please contact us

Dear Tejas,

Thanks for your reply, but presenctly we have procured one photocatalytic reactor but in future i will contact you.

Dear Sir, We offer a completely different system for Photochemical application, specially for Water Spliting. We would be testing our Solar simulator setup as per neeris requirement . will share data.

Our Standard Photochemical system have a Digital Controller which controls exposure for UV visible & Xenon lamp. With a in built chiller to absorb heat.

we have scaled the system to 200 liters as per clients requirement.

We have developed a safety switch in our Photo Safety Cabinet which starts UV lamp only when the door is shut and would start exhaust system if gas is collected in the cabinet . The system also has a Alarm which would go on door is closed.

http://www.youtube.com/watch?v=kCMc4zzBRfg

please visit the video

Hi

Very simple use any quartz cell which is used in UV spectrophotometer, you can get those from any of the local vendors to do small scale research. alternately buy rectangular quartz sheets , past them and use it.

Dear Mr. Tayade,

We have been using photochemical reactors provided by Ace-Glas Co. with good quality quartz immersion wells for the lamps. The reactor vessel has three or more ports. You can find more information and download a catalog at:

www.aceglass.com/html/3dissues/Catalog2012/files/414.html.

If you intend to build your own reactors, I recommend to check the transmittance of the well material before use. Sometimes it may happen it gets contaminated with iron during manufacturing, which filters UV radiation.

Antonio Teixeira

Urgent????  

Please I need the specification of photochemical reactor system with good quality quartz immersion wells for the UV visible & Xenon  lamps and have a Digital Controller. And also, with a in built chiller to absorb heat. And Also, Price .???

you can contact Tejas Lele, who has posted on this page....we have to add chiller additionaly to to control temperature of your reaction..

Thanks alot

I am looking for a photochemical reactor for performing the photocatalytic reduction of CO2 experiments. Kindly suggest which one is best and from where I can get details???

Hi Raj, what is your application?