Please, i need assistance on Fullprof software or other software to analyze powder data?

Mathew Adefusika Adekoya @Mathew_Adekoya

01 January 2018 0 8K Report

Please, i need assistance on Fullprof software or other software to analyze powder data

Badges
Science topic

More Mathew Adefusika Adekoya's questions See All

What are the condition that i should expect when i reach Nanocellulose using Concentrated Sulfuric acid?

The colour and how it's going to look at . I will be happy if i can see a paper that will support that. Thank you

09 October 2017 2,454 0 View

I need a procedure in extracting nanocellulose using concentrated sulphuric acid

and the colour after extracting the nanocellulose

07 August 2017 1,265 1 View

Does materials get improve at nano level?

07 August 2017 3,612 1 View

Please, I need a procedure in calculating miller indices for powder material

Please, I need a procedure in calculating Miller indices for powder material

05 June 2017 6,051 5 View

Hello, I need recent FTIR and SEM Monograph paper on wood cellulose?

Mechanochemistry: ball to powder mass or ball to powder volume?

I run mechanochemical reactions that involves the use of a large amount of catalyst (1:1 molar ratio to the reactant). When I try to understand the effect of amount of catalyst on the reaction, I...

23 July 2024 9,938 1 View

How to decide whether the refinement is correct or not, based on Rwp and Rexp factors by Fullprof?

One of the papers I read by Toby, where (title of the paper was "R factors in Rietveld analysis: How good is good enough?"), he tells us that to get good chi square value, you must have low Rwp,...

17 July 2024 9,668 4 View

I want to plot calibration curve of pure mirtazapine powder using HPLC. Can someone please suggest a method without HPLC buffer as a mobile phase?

I am searching for HPLC method to estimate Mirtazapine but i want to avoid HPLC-buffers as a mobile phase component. So, I am looking for alternative HPLC-solvent (acetonitrile, methanol etc.)...

14 July 2024 1,493 3 View

What binders suggestion that I can use for zinc alloy?

I am working on powder metallurgy, and during the compaction process, the powder does not pelletize and remains in its powder form. To address this issue, I am considering using binders to improve...

13 July 2024 9,003 2 View

How i figuer out the weight of curcumin powder?

I am trying to load curcumin emulsion in 4% chitosan gel but i don not know how many mg powder is needed ?

10 July 2024 2,462 1 View

How do we evaluate whether the results of Fullprof Rietveld analysis are acceptable?

I am new to Fullprof and trying to perform a Rietvied analysis of a rare-earth zirconate sample. I was informed that one of the parameters to evaluate whether the results are acceptable is by...

10 July 2024 5,827 1 View

Can anyone suggest what amount of powder I have to disperse in the solvent for taking the FTIR spectra?

I have to compare the FTIR of the two samples, one is in powder form and other one is the powder dispersed in IPA or water. Both are same material, so how the bond will change

09 July 2024 8,011 2 View

Is VSM measurment of NdFeB alloy powder sample require any spesific sample preparation ?

Is any specific sample preparation required to perform VSM measurement of NdFeB alloy powder to get a square-shaped M-H loop? Or is it mandatory to make magnetically aligned and sintered pellets...

09 July 2024 1,969 0 View

I have need a LPBF/SLM model on comsol multiphysics ?

In this model clearly understanding how to active one layer to another layer and how to add powder material properties step by step.

08 July 2024 6,147 0 View

Can other standards be used to generate IRF file instead of LaB6,Si etc.,,, for Rietveld Refinement?

Hi, my research involves in ZnO synthesis. I have performed rietveld refinement of my samples and obtain a good fit using Fullprof suite software. However to obtain the crystallite size, the IRF...

07 July 2024 3,526 3 View