To do my paper work
Hi there!
I think you could load this function into R:
https://github.com/cran/circular/blob/master/R/watson.two.test.R
Hope that helps!
Thank you for the suggestion, but I am not able to run the codes. If you have any alternative suggestion would be great.
The band gap of metal-semiconductor-based core-shell nanocomposites is very narrow compared to their semiconductor nanoparticles. Is it characteristic of core-shell structure or any other doping...
31 January 2024 8,512 4 View
Relation to determine trap energy from J-V characteristics obtained at varying temperatures of solar cells and expound upon the optoelectronic parameters based on the trap energy.
30 August 2023 9,899 2 View
Requested scientific theories and comprehensive experimental data.
13 June 2023 703 3 View
The same model provides 0.94 R2 value for one test set (9 observations) while 0.73 R2 value for another test set (95 observations), however, 0.73 R2 is associated with lower RMSE and MAE. how to...
18 May 2023 4,016 3 View
I have calculated the uncertainty from repeated measurements. Is it possible to have an uncertainty value, which is lower than the accuracy (given in the specification) of the instrument?
26 February 2023 5,930 6 View
SYBR Green I is an asymmetrical cyanine dye. The relative fluroscence of this dye increases when it binds to double-stranded DNA. This precisely quantifiable increase of fluroscence intensity is...
01 November 2022 4,417 0 View
Hello everyone. It is well-known that A/F ratio is not a direct regulated parameter in CI engine. Additionally, the A/F ratio is not required to be kept constant as the fuel supply in CI engine...
19 September 2022 4,702 0 View
Hello Everyone, I have found that the zeta potential values of my samples are very close to zero. I have used TWEEN 80 and SPAN 80 at different proportion. The HLB value I have kept in the range...
07 February 2022 8,146 7 View
My experiment needs anhydrous orthophosphoric acid and we only have a 85% aqueous solution. Any method to dry it? Most of the literature I found deals with purification from metal ions present in...
18 January 2022 5,657 1 View
I tried neutralizing orthophosphoric acid with triethylamine using 1:3 stoichiometry by stirring the two liquids at room temperature but a lot of triethylamine remains unreacted which suggests...
08 December 2021 9,228 0 View
I ran the ARDL approach on E-Views 9, and it turns out that the independent variable has a small coefficient, but it appears as zero in the long-term equation as shown in the table, despite having...
23 December 2022 7,644 5 View
Using E-Views 9, I ran the ARDL test, resulting in an R-Squared value in the initial ARDL model output and an R-Squared value under the Bounds test. so, what is the difference between these two R...
03 December 2022 800 2 View
hello all, I'm looking for a comprehensive guide on how to add pv panel to neplan Library . ? Thanks !
10 May 2022 2,592 0 View
i'm having problem in deciding how to run the regression. i want to see whether before and after covid, banks look at different characteristics when pricing loans. If for example in the period...
10 November 2021 7,702 11 View
Dear colleagues, I am planning to investigate the panel data set containing three countries and 10 variables. The time frame is a bit short that concerns me (between 2011-2020 for each country)....
15 August 2021 8,734 6 View
I am running an ARDL model on eviews and I need to know the following if anyone could help! 1. Is the optimal number of lags for annual data (30 observations) 1 or 2 OR should VAR be applied to...
18 May 2021 2,994 6 View
Dear All, I would like to perform event study analysis through website: https://www.eventstudytools.com/. Unfortunately they ask for uploading data in a format i dont understand , dont know how...
07 September 2020 4,866 7 View
To illustrate my point I present you an hypothetical case with the following equation: wage=C+0.5education+0.3rural area ( Where the variable "education" measures the number of years of...
10 July 2020 3,090 12 View
In order to analyze if there is a mediation effect using Baron & Kenny's steps, is it necessary to include the control variables of my model, or is it enough to do the analysis just with the...
11 December 2019 9,145 6 View
Reading Wooldridge's book on introductory econometrics I observe that the F test allows us to see if, in a group, at least one of the coefficients is statistically significant. However, in my...
11 December 2019 3,755 6 View