Is it ok to use to water for synthesis and purification of nanoparticle?

I'm trying to synthesis graphene oxide nanoparticles. Shall I use RO water to wash the synthesised GO nanoparticles. Please help me out. Regards Deepthi

31 January 2019 5,266 4 View

How to use graphene nanoparticle for batch experiments?

I want to remove dye from wastewater using graphene oxide Nanoparticle. I faced few issues while doing batch experiments. Please help me out. I'm new to nanotech field. So kindly help me to figure...

19 November 2018 3,037 2 View

How to analyse raman spectra of graphene oxide nanoparticles? what is the g&d band for GO?Does laser wavelength has any major effects on raman shift?

I have raman spectra of Graphene oxide nanoparticles. The laser wavelength is 1064 nm. I can't find any literature with this wavelength. I had no choice with the laser wavelength that's why I...

10 September 2018 8,541 2 View

Want to measure the wear rate at different sliding speed.In most of papers read wear is measured at only constant speed.suggest diffrnt speeds chosen?

Working ON PTFE material with graphite as filler. What all the sliding speeds can be considered for carrying the work.

30 June 2018 9,209 5 View

Journal bearing and sliding bearing both mean the same?

can any one provide material on journal bearing . I want to manufacture the bearing and characterise that Kindly do needful in this regard

29 March 2018 5,173 2 View

Is it neccessary to do batch adsorption experiments for nanocomposite that are present nanomembrane?

Do we really need to do batch adsorption experiments for nanocomposite which is used to make nanomembrane?Is it ok to skip that part and directly do lab tests for nanomembrane?

17 February 2018 3,747 2 View

What is formula for finding density of polymer composite, when it is reinforced,

Knowing the density values what is the formula for finding density of polymer composite.

23 May 2017 1,537 2 View

What is the best housekeeping genes in humantissue and blood samples for qpcr analysis?

21 December 2016 4,183 7 View

How is FM 1-43 stained to membrane of epithelial cells?

28 September 2016 8,059 1 View

How does one verify the grazing angle in TIRF during live-cell imaging?

Even with as low as 0.5 microlitre volume of FM-dye, laser power as low as 10%, penetration depth of 25nm, my cell sample illuminates like it does epifluorescence. I am using Olympus CellLineTIRF 4.

25 August 2016 5,552 1 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

How to measure angle between laser travel path and machine axis in Laser Measurement system?

25 February 2021 1,987 3 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

The Role of Town Planners in CAV Use?

Colleagues and I are about to begin a project investigating the role of town planners and local authorities in establishing the introduction of connected and autonomous vehicles (CAVs). What...

21 February 2021 2,247 3 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View

absorption= 1-mag(S(FP1:1,FP1:1)*S(FP1:1,FP1:1))-mag(S(FP2:1,FP1:1)*S(FP2:1,FP1:1)) is it correct for absorption ?

hi everyone I am simulating a unit cell structure in HFSS using Flouquet port having two modes for absorption I have used this formula:- absorption=...

17 February 2021 9,178 2 View