Joining of Shape-Memory Polymers (SMPs) by friction stir welding feasible or not?

Sudhir Kumar @Sudhir_Kumar98

01 January 2019 0 5K Report

Joining of Shape-Memory Polymers (SMPs) by FSW successfully possible or not?

Your opinion is highly appreciated

Regards

Sudhir

Badges
Science topic

Similar topics
Social Psychology
Attitude

More Sudhir Kumar's questions See All

How entanglements of polymer chain affect friction stir weld quality?

Please suggests mechanism related to entanglements for FSW of ABS polymer. Your opinion is highly appreciated Regards

31 December 2018 9,977 0 View

Effect of electromagnetic radiation (mobile tower) on birds, animals, crop, plant and human? How we will safe from electromagnetic radiation?

We know that Cell phone industry is becoming another cigarette industry, which kept claiming that smoking is not harmful and now there are millions of people around the world who have suffered...

11 December 2018 5,960 4 View

If ABS and PC are to friction stir welded, why the offset is important, which side, how much and what is its effect?

Your opinion is highly appreciated Regards Sudhir

11 December 2018 7,779 2 View

Which tool material and pin profile is most efficient in friction stir welding of polymer??

Tool material for friction stir welding of polymer

11 December 2018 5,903 0 View

I couldn't find any of the following phase diagrams : Phase diagram of: dissimilar polymer.?

Does anyone have any idea about phase diagrams of dissimilar polymer? I hope someone can help me, as far as I have searched, I could'nt find any of the following phase diagrams : Phase diagram of:...

10 November 2018 9,955 2 View

How will calculate porosity % in case of FSW of polymer?

FSW of polymer

10 November 2018 4,556 0 View

What is relation between welding parameter and hardness of Polymeric material welded in friction stir welding?

FSW of polymer

08 September 2018 9,569 0 View

How to give rotational velocity of swash plate in boundary condition in fluent.if i do so it will take rotation of shadow of swash plate?

after iteration the solution is not converged, it shows error as temperature divergent in AMG and increase relaxation sweep. i am using energy equation with laminar condition.my objective is to...

02 March 2018 1,070 2 View

Suggest some idea for good weld quality & increase joint efficiency for joining of polymer by friction stir welding?

Friction stir welding

05 June 2017 2,956 2 View

Friction Stir welding of disimilar polymer amorphous & semi-crystalline sucssefully possible or not?

Friction Stir welding of polymer

04 May 2017 5,010 0 View

Please, what is the memory consumption of the Matlab function quad tree decomposition procedure [S = qtdecomp(I)] with respect to the input set I?

27 July 2024 5,455 2 View

How should operational parameters be selected when developing a pore-free laser welding technology?

There are three operating parameters - the laser power, the diameter of the focus spot and the scanning speed. It is necessary to obtain a seam of a given depth without pores. What parameter...

27 July 2024 7,168 2 View

What are the important scholarly articles related to 'Use of Likert Scale in social science research' ?

The Likert scale is a commonly used measurement tool in social science research to assess people's attitudes, opinions, or perceptions. The social science students still have difficulty selecting...

25 July 2024 7,535 1 View

Is it fare for editors of reputed Journals to put on hold manuscripts more than six months without review updates, Are they harassing researchers?

It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...

24 July 2024 8,596 2 View

Is it possible to manufacture polypropylene sheets using a biaxial process?

I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...

21 July 2024 1,559 1 View

Masonry Interaction Module ABAQUS?

I am simulating interlocking / dry stacked masonry in Abaqus. I am using a friction coefficient of 0.6 for my model as it is stated in the previous research as well as in the base paper. The...

16 July 2024 5,047 0 View

Why am I seeing only one initial maximum in torque-time curves for the fusion of PVC in a Brabender?

We're studying the stability and fusion behavior of multiple PVC compounds in a Brabender. After a few trials, we set the temperature at 195 °C and the rotor speed at 70 rpm. Samples differ in...

12 July 2024 2,768 1 View

Can an average household DIY spot welder be used for pouch cell electrode tab?

Would an average spot welder suffice for welding tabs for pouch cell electrodes instead of an ultrasonic one? Why would an ultrasonic welder be better than a regular spot welder?

10 July 2024 8,763 0 View

How to maintain intestinal tissue resident cells (TRM) in culture?

I am attempting to culture tissue resident T cells (TRM) derived from fresh intestinal tissue for up to six days. I am finding that the viability of the T cells is low at D0, and a very small...

08 July 2024 4,887 2 View

Designing Inclusive City. What's your opinion regarding my group's campaign below?

Hello! I have a campaign assignment related to inclusive cities. Would you mind to take a look and give your opinion regarding my group's campaign? What kind of public facilities do you think are...

07 July 2024 368 0 View