How can be checking and test the nanoparticles, have uniform distribution or not in the colloidal species?

how can be checking and test the nanoparticles, have uniform distribution or not in the colloidal species?

11 December 2018 4,539 10 View

Which is the suitable materials to composite with Nanoparticles TiO2?

Which is the suitable materials to composite with Nanoparticles TiO2?

09 October 2018 7,233 8 View

In laser ablation in liquids, can be use the electrooptical single crystal such as LINbO3 or KTP immerses in water or solution to prepare NP?

In laser ablation in liquids, can be use the electrooptical single crystal such as LINbO3 or KTP immerses in water or solution to prepare nanoparticles?

07 August 2018 7,553 0 View

What are the most parameters must be electrically investigated of thin nano particles films?

What are the most parameters must be electrically investigated of thin nano particles films?

05 June 2018 2,505 4 View

In preparation of the nanoparticles colloidal, How the polarity of the solvent liquids influences on the optical properties of these particles?

In preparation of the nanoparticles colloidal, How the polarity of the solvent liquids influences on the optical properties of these particles?

05 June 2018 3,357 3 View

Is there a relationship between the size of nanoparticles with length of absorbance waves?

Is there a relationship between the size of nanoparticles with length of absorbance waves

05 June 2018 2,800 5 View

Is the nanotechnology belong to Physics Sciences, Material Emgeneering, Chemistry or Materials Sciences?

Is the nanotechnology belong to Physics Sciences, Material Engeneering, Chemistry or Materials Sciences?

05 June 2018 1,821 5 View

Which is more efficiency for obtains harmonics generations, large or smaller nanoparticles?

Which is more efficiency for obtains harmonics generations, large or smaller nanoparticles?

05 June 2018 762 0 View

It is possible to produce nanoparticles colloidal fro single crystals. Such as LiNBO3 or KDP as atarget in water using pulsing laser(laser ablation) ?

It is possible to produce nanoparticles colloidal from single crystals. Such as LiNBO3 or KDP as atarget in water using pulsing laser(laser ablation) ?

05 June 2018 4,849 0 View

In laser ablation which is more effective on the properties of the obtained nanoparticles, the number of pulses or the laser influence?

In laser ablation which is more effective on the properties of the obtained nanoparticles, the number of pulses or the laser influence?

04 May 2018 4,708 3 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View

Concrete compressive strength databases?

I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...

27 February 2021 6,801 3 View

How can we limit artifacts caused by rotation in fiber photometry?

We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...

25 February 2021 568 1 View

How to measure angle between laser travel path and machine axis in Laser Measurement system?

25 February 2021 1,987 3 View

How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View

Can we recognize signs of the "volatility clustering" property of a time series in its time domain plot?

My purpose is to recognize the volatility clustering property without statistical tests such as The Lagrange Multiplier (LM) test.

24 February 2021 4,150 3 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

How can we add reinforced thermoplastics with granules in injection molding machine?

I need to make an injection molding machine in which short fibers are to be introduced. Short fiber length and material properties are to be determined and also the material strength are to be...

22 February 2021 4,290 1 View