How to find load / force acting on the top face in ansys workbench?

The image attached is the representation of my application. This is an assembly of three items (top plate, bottom plate and the 5 load cells). The bottom plate is fixed and a load of 40 Kg is...

15 December 2020 1,145 6 View

Can we choose multiple natural sources together for the synthesis of Carbon quantum dots?

will it be an advantage for the synthesis ?

26 August 2019 2,223 3 View

Flow separation : Turbulence or Laminar?

Hi researchers, I am performing CFD analysis inside an electronics enclosure. The Reynolds number is below 1000 but I have some blocks and heat sinks inside that creates flow separation and wake...

20 May 2019 1,357 19 View

Has anyone experienced varied behaviour of ICP-OES instrument each time it is operated?

We face the following problem: 1) It's a general problem faced. During the standard calibration (irrespective of metal), the std. calibration was successful the previous time, but the next time...

24 January 2018 2,469 3 View

What is the flaky material present on the surface of the biomass (Untreated) as seen in the Scanning Electron Micrograph?

23 June 2017 3,864 1 View

Is it advisable to determine the Cr(VI) concentration present in NaOH (Desorbing agent) using 1,5 Diphenyl carbazide method?

06 February 2017 8,277 3 View

I would like to know if anyone has experienced infecting T47D (Breast Cancer) cells lines using Lentivirus?

Lentivirus; T47D cells

10 May 2016 1,308 3 View

What is the best method to screen an efficient part- root, shoot and leaves (separately)of a plant biomass in metal uptake?

With the optimal pH found, can I screen the part (root, shoot or leaf) by just subjecting it to the metal solution (fixed conc.) at optimum pH for a particular time period? Or is time studies...

12 March 2016 9,696 3 View

Can anyone suggest a data base to identify the protein of the MDA-MB 231 cell line (breast cancer)?

Name of protein to be chosen for MDA_MB231 cell lines and its structure will be useful.

16 February 2016 7,370 1 View

What would be a suitable composite material for drive shaft?

Hi all, I am searching for a composite material which will be effective as like existing material used in Automobile drive shafts. I have to do FEA analysis using ANSYS 14.5 and submit a...

01 November 2015 4,769 6 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View

Where can I find life cycle inventory or assessment of non woven materials?

Dear network, I am looking for the LCA or LCI or at least the energy balances of the non woven fabrics process for my master project, in specific for natural fibers, yet I have found...

02 March 2021 9,662 1 View

How optimize the Size Exclusion Chromatography?

Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...

01 March 2021 2,215 2 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View