Hi, do you know how to find literature using for CO oxidation simulation on Au?

from the abstract of the literature you have shared, it appears like prepared electrode was used as working electrode rather counter electrode. working electrode can be anything which is electro-chemically active and has conductivity . but counter electrode is the electrode used to remove H+ evolving in the reaction and that can be done by noble material easily...gold-Pt can work fine but surface area i.e. size of rode need to optimize for proper results.

Dear all, the question should specify either it means combined metals electrodes or any other material combinaison. To the last case, graphene combinations are widely used. The following reference is an exemple. My Regards

https://doi.org/10.33961/jecst.2019.00052

Khanh Tran

Thanks for your message. I think there are a couple of studies (such as the attached links) but I could not find any specific study in the electrochemistry field.

https://www.nature.com/articles/srep05441

Jignesh G. Hirpara

Thank you for your response and comment. Is there any specific software I can use to do the optimization to find the proper size of rode?

Abdelkader BOUAZIZ

Thank you for taking the time and replying to my message. I mean combined metal electrodes. Also, thanks for sharing the article.

Dear Zohreh Hirbodvash, no thanks and it is my pleasure. These attached files are additional support, Hope they will help you in your work. My Regards

Abdelkader BOUAZIZ

Thank you so much for the attachments. It is well-appreciated.

Dear Zohreh Hirbodvash;

I totally agree with Jignesh G. Hirpara, Au/Pt alloys are rather used as a working electrode. Attached are some interesting documents.

With my best regards

Doufnoune RACHIDA Rachida

Thank you for taking the time and replying to my message. Also, I am grateful for the documents you shared.

I fully agree with Doufnoune RACHIDA Rachida