Is it really necessary to have a bypass in a hydrodynamic cavitation setup? What is at stake when there is no by pass?

Juwon Jeremiah Maku @Juwon-Maku

15 December 2019 0 2K Report

Most of the hydrodynamic cavitation schematic diagrams online have a bypass before a venturi or orifice.

Badges
Science topic

More Juwon Jeremiah Maku's questions See All

In true boiling point distillation of crude oil, where is the temperature reading taken to obtain different fractions?

The setup include a round bottom flask, a column with packings and a condenser, inclined at 75 degrees.

04 September 2021 8,429 3 View

What are the precautions to be taken when modifying a domestic microwave for plug flow treatment applications?

How to properly modify a domestic microwave equipment to treat a sample in plug flow arrangement. The risk of the operator's exposure to the microwave irradiation should be minimized.

10 July 2019 5,582 2 View

Should pre-occupancy study of buildings or structures be made mandatory as feedback mechanism for reference?

Once the building is commissioned and handed in to client. The Designer's job is done. As I grew in the in the profession I realized there is more to what I was thought. I asked myself, what...

15 October 2018 4,231 0 View

How can one increase the organic loading rate of a newly started 20 L biogas digester targeted to be fully functional in a month time gradually?

Due to limited resources, stability parameters like pH, VFA, TN, VS, etc cannot be measured, except biogas combustibility

07 August 2017 5,429 5 View

Do anyone have a protocol of using a hydroponic nutrient solution for transformant selection using hygromycin? Not on agar but in hydroponic solution?

Please I need to know how to add hygromycin B to my hydroponic solution for transformant selection. My vector construct contain Hygromycin ressistant gene (HPT). I know how to use the MS selection...

15 November 2016 2,088 4 View

I am using Agrobacterium rhizogene to transform some Arachis and gene knockout using pYLCRISIPR/Cas9?

I'm working on Peanut nodulation gene knockout using pYLCRISIPR/Cas9... One set using culture media (co-culture) and (selection media supplemented with hygromycin B) since the Binary plasmid has...

13 March 2016 1,501 1 View

Where can one obtain the quantitative data of international maize trade?

I doing Agricultural economics (honors) at University of Fort Hare, and my project is mainly focused in the trade of international maize market, I managed to gather literature about my topic but...

07 April 2015 5,977 4 View

The hydrodynamic evolution on the coastline of west Point, Monrovia, Liberia?

the hydrodynamic For the past 20 years, from 2003 to 2023, the present year, 2024 and future year 2040.

10 July 2024 6,044 0 View

How to get "density" and "viscosity" for cavitation(water vapor) for cavitating Francis turbine?

Hello there I am simulating cavitation for a Francis turbine. Francis turbine is rotating with 826 rpm. I have two questions; 1- Vapor pressure for my case is 2100 Pascal, and Temperature is 25...

13 May 2024 4,403 7 View

Running HD Simulation on Mike Zero?

When I ran the HD Simulation on Mike Zero, I got an abnormal completion error stating that "CheckLicense: Node Limitations exceeded." Has anyone faced this problem in the past? How can I solve the...

27 March 2024 8,868 2 View

I am trying to simulation a double channel hemt on Sentaurus TCAD but Transferred Electron 2 model is not working? Can anyone help to understand ?

The mobility model that I am using is DopingDependence model and Transferredelectrton2 for high field degradation of mobility by intervalley scattering. This should reduce the current but it is...

13 March 2024 1,781 0 View

What is the resolution limit of DLS?

Can DLS measurement distinguis the hydrodynamic size of particles with 250nm and 270 nm? what is the resolution of the method?

06 March 2024 1,692 1 View

Error with Hydrodynamic Simulation on Mike Zero?

My hydrodynamic simulation went from 0 to 100% immediately on Mike Coupled Model FM. And no results was generated afterwards. I don’t know what the problem is. I forced the model with the tidal...

17 January 2024 2,813 0 View

Tidal Prediction of Heights Error on Mike Zero: “Abnormal Run Completed”?

I’ve been trying to run the tidal prediction of heights on Mike Zero. But once I input each point coordinates from the different stations, and execute the tidal prediction, it does not go...

11 January 2024 2,117 0 View

Error with "Tide Prediction of Heights” on Mike Zero?

Whenever I input my created mesh file in the “Tide Prediction of Heights” on Mike Zero, the longitude and latitude of the start and end points are not automatically detected. And as a result, I...

06 January 2024 2,632 4 View

Running Simulation on Mike 21/3 Coupled Model?

Hello there. I’ve been trying to run my simulation on Mike 21/3 Coupled Model, but I kept on running into errors. Also, I can’t find the output file. In fact, I don’t know what it is like. The...

03 January 2024 8,543 2 View

Is this the best way to present a analysis of breaking waves on a breakwater with sea level rise?

I am currently investigating a breakwater and how it will cope with climate change, particularly sea level rise. I have collected wave data and doing a hand calculation method to test the wave...

06 September 2023 5,285 0 View