Is it possible to use Electrophoretic deposition method for 2 square meters of aluminum coating with CNT solution ????

Tarek Kh Abdelkader @Tarek-Kh-Abdelkader

16 January 2018 0 6K Report

Please, If it possible, could you tell me how to do it in Lab. ??

I need to coat 2 square meters of aluminum to be as a solar absorber, but I don't know how to coat it with CNT solution by Electrophoretic deposition method

Badges
Science topic

More Tarek Kh Abdelkader's questions See All

Name of my daughter?

karma

20 June 2024 6,189 1 View

How can I recover a borate glass stuck after melting in a platinum crucible, while keeping both the piece of glass and the crucible ?

the glass is stuck strongly in the crucible I want to recover it to make the characterization on the pieces

05 June 2024 3,088 0 View

How to prepare 100ml solution of 2.5% Glutraldehyde in 0.1M PBS(phosphate buffer) pH about 7, from 25% Glutradehyde and 1X PBS?

final solution volume is 100ml

03 June 2024 417 0 View

How can i use hexamethyldisilazane(HMDS) for drying instead of Co2 and freez drying for SEM analysis of rice anther and pollen?

could you please help with a protocol? should i do it directly on the aluminium stub after dehydration with 100% alcohol or not? should i release the pollen or whole anther is better and dehisce...

03 June 2024 4,793 8 View

Who like to share thoughts on AI in Education?

Greetings, I invite you to participate in a research study aimed at exploring the impact of Artificial Intelligence (AI) on education, focusing specifically on its effects on staff roles, skill...

12 May 2024 424 2 View

Is there a open source raman spectroscopy program for pattern identification analog to QualX and Match for XRD patterns?

I have two patterns one is pure Brucite and the second is brucite with my adsorbed material and I want to identify the impurities on the second pattern. Thank you for any help you may provide.

22 April 2024 7,592 0 View

I need help about rheology, please ?

i need to know the answer of this question please with some references can help me

21 March 2024 4,364 0 View

Calculate congestion with TCP mechanism?

On ns2 simalator, I need to make modifications in the AOMDV protocol. How to calculate congestion for a route using the TCP mechanism.

17 March 2024 3,554 2 View

What is the best way to detach macrophages ?

I am doing BMDMs and I can not detach macrophages , they are so sticky and trypsin is not enough to detach them. would scrapper works or will it destroy the cells ?

07 March 2024 2,502 3 View

Reviewing an article in the field of civil engineering ?

Reviewing an article in the field of civil engineering؟ Specialization in building materials Branch of using fibers in compacted earth blocks

02 March 2024 1,596 0 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Stability of the Solar System: Insights from Einstein’s Equations ?

The stability of the Solar System is a complex subject that blends the classical framework of Newtonian mechanics with the modern insights provided by General Relativity (GR). Understanding this...

07 August 2024 2,569 1 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

How to use Density Functional Theory to calculate carrier mobilities of solid system?

Hello, everyone. I have tried to determine carrier motilities of some materials, by Density Functional Theory, using Quantum ESPRESSO. There are a few methods to do it, like a package called...

04 August 2024 8,894 1 View

Does continues partial charging/discharging do any harm to the BESS performance and degradation?

For a grid connected BESS (lets say 100 MW/200 MWh system, LFP battery), if we charge the BESS in such a way that whenever we can access power from the solar that will charge the BESS. Hence it...

01 August 2024 9,903 7 View

Best mask design for metal deposition aiming build a Perovskite solar cell device?

What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?

31 July 2024 4,835 3 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

Which filtration method to go for run off water from dirty solar panels to be used again?

We are working on a robot that cleans solar panels using fresh water supply and a rotating brush. We are trying to conserve as much water at possible by recycling the dirty water that is collected...

28 July 2024 5,778 2 View