How does density profile form during production by ContiRoll press? how to modify it?

During the production of MDF by ContiRoll press three main factors effect on MDF density as well as its quality. these factors are moisture content, heat and pressure. So, to modify the density...

09 October 2017 7,320 2 View

Does anyone has a standard for MDF classification?

I need to have a standard to classified MDF after sanding based on its defects.

04 May 2017 215 1 View

Can anyone suggest the simplest method for paper deinking?

06 July 2014 2,898 11 View

Which is the most convenient manufacturing software for Additive Manufacturing?

Which tools can be used to generate machine codes for additive manufacturing?

02 March 2021 7,220 2 View

What software programs can directly simulate Additive Manufacturing Directed Energy Deposition (DED)?

I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....

24 February 2021 4,428 3 View

How to differentiate the economic productivity in agriculture and in manufacturing sector?

Most of the references I found were on the economic productivity in agriculture but very limited application in manufacturing sector. I would appreciate if anyone could share the references on...

15 February 2021 8,342 7 View

What are some alternatives to the Self-Directed Learning Readiness Scale (SDLRS) developed by Dr. Lucy L. Guglielmino?

The Self-Directed Learning Readiness Scale (SDLRS), also known as the Learning Preference Assessment (LPA), was developed by Dr. Lucy M. Guglielmino in 1977 to measure learners' attitudes of and...

15 February 2021 3,095 4 View

What are backpropagation formulas for residual neural networks?

14 February 2021 4,194 3 View

How to derive equations for a resonant buck converter with ZVS?

I am not understanding how each author is deriving the equations and the working principle. Individual authors are giving their own working principle explanation for different circuit topology....

12 February 2021 496 1 View

How to apply graphene oxide on an gold electrode?

Dear Fellows, now it is the time to push graphene applications further in terms of easy and low cost production surroundings. Thus I recently dived in the materia and I am facing tons of papers,...

02 February 2021 6,284 2 View

Cell culture compatible glue/sealant?

Hello We are looking for a glue /sealant to fix and secure some glass parts of a live cell imaging chamber. It has to be biologically inert because it may come in contact with the medium, and...

01 February 2021 6,886 3 View

How could I do a simulation for the energy consumption of a CNC machine?

I'm working on my dissertation and it is about how to save energy when a CNC machine goes to idle mode. (A concept model of the idle machine energy saving in industrial manufacturing...

26 January 2021 9,620 5 View

How to add a single parameter in Ansys Additive Manufacturing Workbench parameter setting dialogue box?

Ansys 19.2 R2 and 2020 R1 versions of Additive Manufacturing Workbench is convenient for powder-based Additive Manufacturing processing. However, in this workbench, there is a machine parameter...

19 January 2021 3,017 2 View