Is it possible to simulate a micro thermoelectric generator (TEG) using Silvaco-ATLAS?

More Reza Meshkin's questions See All

If the emission of all greenhouse gases is stopped now, will the temperature of the earth continue to rise?

Here's a serious question: If we were to stop emitting all greenhouse gases right now, would the Earth's temperature start to cool down, or would the existing greenhouse gases continue to warm the...

30 July 2024 5,123 4 View

How to prepare 100ml solution of 2.5% Glutraldehyde in 0.1M PBS(phosphate buffer) pH about 7, from 25% Glutradehyde and 1X PBS?

final solution volume is 100ml

03 June 2024 417 0 View

How can i use hexamethyldisilazane(HMDS) for drying instead of Co2 and freez drying for SEM analysis of rice anther and pollen?

could you please help with a protocol? should i do it directly on the aluminium stub after dehydration with 100% alcohol or not? should i release the pollen or whole anther is better and dehisce...

03 June 2024 4,793 8 View

Can we create a GVHD model by using stimulated PBMCs and doing co-culture on cell lines?

Hello, I had a question about GVHD. We wanted to investigate the effect of a cytokine in GVHD, but we don't have the possibility to use a GVHD mouse model. Can we do it by using stimulated...

28 May 2024 8,305 1 View

What is the best method to enhance the surface hardness of cutting tools made from SPK steel?

SPK tool steels are used for cutting wires made from low carbon steels. We are searching for a cheap and effective method for increasing the cutting characteristics of the cutters.

14 May 2024 4,948 0 View

Constant Reciprocal of Step Size?

Hello I recently encountered a problem with the reciprocal of step size plot in Comsol Multiphysics. After a certain time (seconds) in a time-dependent solver, the plot oscillations will be...

04 May 2024 7,278 0 View

Poor viability of T cell after transduction with CAR Lentivirus!?

Hi everyone I produced a batch of virus , enriched it with centrifugation, and titrated it with T cells after 48h. For my experiments I want to use MOI 3 and that's equal to 1/12 dilution. but at...

02 May 2024 9,727 3 View

Are you interested in submitting papers to a new journal called "InfoScience Trends"?

InfoScience Trends offers comprehensive scientific content that delves into various facets of information science research. This includes but is not limited to topics such as information...

26 April 2024 9,521 1 View

Does the color of pan traps affect the sampling of flies from the superfamily Bombylioidea?

Garret, 2020 used traps of blue, yellow, and white colors for sampling and collected several specimens.

06 April 2024 6,995 2 View

Laboratory procedures for identifying the concentrations of formic acid and acetic acid in aqueous solutions???

What are the laboratory procedures for identifying the concentrations of formic acid and acetic acid in aqueous solutions using titration, spectrophotometry, or gas chromatography methods...

06 April 2024 187 3 View

I have get this error when i calculated the geometrical optimization for prco3, it takes 12 hours until gives this message in the outputfile?

Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...

09 August 2024 7,615 1 View

What is the prepared reference material that can be used in inductively coupled plasma optical emission spectrometry (ICP-OES) to measure REE and U ?

What is the prepared reference material that can be used in the ICPE-9820 Shimadzu Japan instrument, which employs inductively coupled plasma optical emission spectrometry (ICP-OES) to measure...

06 August 2024 1,896 1 View

How effective is the Citi Bloc standard basket in enhancing the accuracy and comparability of international construction cost assessments?

Citi BLOC Standard Basket Definitions: A standardized unit representing a fixed basket of construction materials, labor, and equipment costs priced in various cities. Purpose: To create a common...

04 August 2024 8,997 1 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

How can I calculate AlGaN/GaN HEMT Breakdown Voltage on Silvaco TCAD?

Hello, I'm newbie to TCAD. I wanna calculate Breakdown Voltage of AlGaN/GaN HEMT. But, my code shows just saturation. Could you please help me how to simulate Breakdown Voltage of my code? And...

25 July 2024 3,738 1 View

Can we eliminate the stress singularity at the tip of the crack by manipulating the elastic constants?

The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.

25 July 2024 9,976 3 View

How can i solve the code problem in Sentaurus TCAD?

Currently, I have created a gate-all-around process using sentaurus tcad and I am trying to measure the noise using the cmos noise code. However, an error occurred during the simulation. The error...

24 July 2024 6,352 0 View

Wrong out put for gmx x2top?

Dear users, I would like to simulate a zeolite structure in gromacs. I got the .cif file from IZA expanded in one direction in Materials Studio and exported a .pdb file. However, when I want to...

24 July 2024 367 4 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

Dr Shiromani Balmukund Rahi

Hii, I am sending some google links. May, these resource help you. In link 1 plz go through section 4, page no 29. Best of luck

https://apps.dtic.mil/dtic/tr/fulltext/u2/1009330.pdf

https://www.comsol.co.in/paper/multiphysics-simulation-of-micro-thermoelectric-generators-based-on-power-factor-52801.

Reza Meshkin

Thanks for your useful links.

L. Arivazhagan

Hi Reza,

You fix thermo contact at the boundaries of your structure. And vary the temperature of thermo contact. Then Meseaure charge distribution and energy band bending. From these , you can extract generation voltage. This is my view. I am not sure it will work out. But I hope it may work out.

Hi, thanks for your valuable comments.