I have downloaded the 7 days GNSS observation data from one of the UNAVCO listed CORS station. So there are 7 different 24h files for each day for the same CORS station. Can I perform PPP in RTKLIB using all 7 days 24h files at the same time? If so how can I do that?
#### Basic Approach
When setting the path to the PPP datasets:
-obs
-brdm
-sp3
-clk
you may use any of the following parsers (these are general keywords):
##########################################################
%Y ==> yyyy : four-digit year (2000-2099)
%y ==> yy : two-digit year (00-99)
%m ==> mm : month (01-12)
%d ==> dd : day of month (01-31)
%h ==> hh : hours (00-23)
%H ==> a : hour code (a-x)
%M ==> mm : minutes (00-59)
%n ==> ddd : day of year (DOY, 001-366)
%W ==> wwww : gps week (0001-9999)
%D ==> d : day of gps week (0-6)
%N ==> d : sequence number (0- )
%s ==> ssss : station name (lower-case)
%S ==> SSSS : station name (upper-case)
%r ==> rrrr : station name
##########################################################
For example, for your task, you may set the DOY for multi-day processing or the station name for multi-station processing.
Note: Remember to list the station names in the processing
scheme.
For example:
-karo
-mzuz
-ctpm
-vwzm
-...
#### Advanced Approach
You may write a program to call the following:
-PPP configuration file
-rnx2rtkp
The processing program may be written in
-Bash
-Python
-Julia
-...
- Badges
- Science topic
- Similar topics
- Filing