Is it neccessary to do batch adsorption experiments for nanocomposite that are present nanomembrane?

More Deepthi Murali's questions See All

Do we have any empirical model to model the combined effect of carbonation and chloride attack in concrete concerning climate change?

Do we have any empirical model to model the combined effect of carbonation and chloride attack in concrete concerning time-dependent temperature, relative humidity and concentration of carbon dioxide?

08 February 2021 4,277 1 View

What is the reference value of THD in BLDC MOTOR speed control ?

i used to control EHO+ANFIS to MRPID to Landsman converter for bldc drive i got 7% but some of them are telling IEEE standards are < 5% is it correct for Drives ?

07 February 2021 5,892 1 View

How do I remove tetrabutylammonium perchlorate after electrolysis of organic molecules?

I am doing electrochemical oxidation of organic compounds for the the synthesis of nitrocompounds from simple organic molecules. I want remove supporting electrolyte after electrolysis. Please...

03 January 2021 7,858 2 View

Could not get reduction peak for Mxene Counter electrode in Iodide electrolyte, why?

I have deposited MXene Ti2C2Tx mixed with tritonX binder and heated at 250 C for half an hour in ambient air conditions on FTO glass substrate, the deposition technique followed was doctor...

28 November 2020 2,330 6 View

What are the best binder which can be used for deposition of MXene on FTO?

I would like to coat MXene (Ti3C2Tx) on FTO glass substrate using doctor blade deposition technique, for which i think a binder is essential for the adhesion of MXene onto the FTO. The post...

28 November 2020 9,360 3 View

Kindly suggest the best organic solvents used for dispersibility of graphite powder?

Kindly suggest me some good papers regarding a comparative study on various organic solvents used as dispersion medium for graphite powder. The application is to make a graphite paste and used the...

24 October 2020 1,586 4 View

What are the best used slurry to coat on TCO using doctor blade method?

I'm trying to deposit TiO2 onto FTO beforehand I would also like to have some knowledge on the other different types of slurry consisting of different materials to coat on TCO using doctor blade...

22 October 2020 1,427 1 View

Could anyone please suggest me some papers on using MXenes (Ti3C2Tx) as CE for DSSC application?

I'm currently working on MXenes as Counter electrode (CE) for Dye sensitized solar cell (DSSC) application. I would like to know about the research work being done in this area. Thank you in advance.

14 October 2020 9,448 2 View

Is it possible to coat/mix MXene (Ti3C2Tx) with conductive polymers such as PEDOT or PANI?

Could anyone suggest me some good papers which involves the coating or mixing of MXenes with conductive polymers such as PEDOT or PANI or any other conductive polymer for that matter.

12 October 2020 5,653 3 View

What are the various methods by which MXenes are deposited on the Transparent conducting oxide glass?

I would like to know the different deposition techniques and the respective conditions and constraints to deposit or coat a layer of MXene (Ti3C2Tx) onto a TCO glass substrate.

04 October 2020 4,616 3 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

Physical-chemical formation of stalactites/stalagmites. what promotes the formation/growth of these structures?

I know, or think I do, the basic idea behind these natural structures, as from what I know they form due to water dripping from the top leaving a salt deposit behind. But started to wonder about...

22 February 2021 1,400 4 View

What are some underexplored theories and concepts in Activated Carbon as A Water Filter?

Hi, me and my team mates are currently planning to pursue the topic of Activated Carbon from Coconut as a Water Filter. And we would like to ask for your suggestions and knowledge on what specific...

21 February 2021 7,561 4 View

How can we study the adsorption efficiency of microgel at the oil-water interface?

I am studing the mircogel at oil-water interface. I want to know the adsorb amount of microgel at the oil water interface. How we can determine this amount?. I will highly appreciate your...

19 February 2021 2,787 1 View

NVT or NPT is preferable for gas adsorption simulation ?

Hi there, In order to perform molecule dynamic simulation on gas adsorption on substrate materials, NVT or NPT ensemble is preferable ? Thanks!

08 February 2021 173 1 View

How do you prepare a porous crosslinked Polyvinyl alcohol and Glutaraldehyde membrane or film?

I am trying to prepare a Polyvinyl alcohol membrane for carbondioxide adsorption

08 February 2021 7,493 3 View

I need help with adsorption kinetics. Basically non-linear plots of pseudo first, second order, avrami equation, elovich and intra particle diffusion?

The questions are too twisted to be explained here. I was hoping if someone who has published a paper can guide me for the same. Kindly contact me at [email protected]. I'd be grateful.

01 February 2021 6,886 2 View

What could be the possible reason for the drastic variation in Qmax value for same adsorbent onto two different cationic dyes itself?

The adsorption capacity of the rice husk biochar was varying drastically with two cationic dyes namely Basic Blue 41 and Basic Red 09? What could be the possible reason behind this?

30 January 2021 1,420 3 View

Which method is preferable for cutting the nanocomposites?

Which of the methods like water jet cutting, diamond cutting, laser cutting, etc. is more suitable to cut the carbon nanotubes reinforced epoxy composites into test sample to ensure the clean...

29 January 2021 1,354 5 View

What is the harmless way of cutting epoxy filled nanocomposite ?

I want to cut epoxy filled nanocomposite for FE-SEM analysis. What is the best way to cut it without resulting in any cracks or change in position or alignment of the particle reinforcement ? Also...

28 January 2021 7,084 5 View

Mostafa Y Nassar

You can read the following papers:

http://pubs.rsc.org/en/content/articlelanding/2016/ra/c6ra12852a#!divAbstract

Article Tunable auto-combustion preparation of TiO 2 nanostructures ...

http://pubs.rsc.org/en/content/articlelanding/2016/ra/c6ra12424k#!divAbstract

Manas Mahapatra

You must perform the adsorption study to ensure the adoption potential of your prepared nano membrane. Then, use it in lab test. Unless doing adsorption, lab test will be more expensive.

For better understanding or clarification you may go through our publications....

Thank you.