Currently I'm doing a project to analyse vibration data of Induction Motors to identify different kinds of faults that they can have. For that I would like to get more samples with various inductions motors having different faults (ex: Mechanically Loosed, Bent Shafts, Bearing Faults, Unbalanced etc.) in order to have a more accurate analysis. If someone have such data, I would like to collect them.
See
https://www.researchgate.net/publication/321490748_Vibration_Analysis_of_Induction_Motors_with_Unbalanced_Loads
https://www.researchgate.net/publication/266556779_A_Vibration-Based_Approach_for_Stator_Winding_Fault_Diagnosis_of_Induction_Motors_Application_of_Envelope_Analysis
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.913.3017&rep=rep1&type=pdf
Dear Imantha
Write to Prof. Dr Slawomir Szymaniec, who works
at Politechnika Opolska, Opole, Poland. He is a specialist of induction machine faults detection via measurements of vibration and noise. He has many measurements of these in industry (power plants and cement industry) and in laboratory with use of smaller machines. He was also a promoter of mumber of ingineering and PhD thesis on the subject.
His e-mail is: [email protected]
I hope it will help You a little.
Piotr Wach, Opole, Poland
There are SKF bearing data collected under four different operating conditions: normal; ball fault; outer race fault and inner race fault with different faults diameters. The vibration signals were obtained from accelerometers mounted at the drive end and the fan end of the motor.
If this can help you, please visit the website of “Case Western Reserve University Bearing Data Centre”.
Goog luck
See
https://www.researchgate.net/publication/321490748_Vibration_Analysis_of_Induction_Motors_with_Unbalanced_Loads
https://www.researchgate.net/publication/266556779_A_Vibration-Based_Approach_for_Stator_Winding_Fault_Diagnosis_of_Induction_Motors_Application_of_Envelope_Analysis
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.913.3017&rep=rep1&type=pdf
The following link contain Bearing vibration which could be useful for you:
http://data-acoustics.com/measurements/bearing-faults/bearing-2/
also check:
https://csegroups.case.edu/bearingdatacenter/pages/download-data-file
Dear Professor P. Wach,
Thank You Very Much for the Recommendation and Sorry for replying after this much of time. We kind of delayed the project due to high academic load we had over the time and Now we have started re-continuing the Project with some advancements.
Sure, I will contact him and Thank You Very much for the suggestion.
- Badges
- Science topic