I want to know how I can I solve laponite and PVA in water.
In Hot Water @ 90 C
we guess, we had uncompleted reaction between formalin and phenol or some changes are needed in process. and also we need to have final resin with 50% solid content and 200 cp in viscosity.
05 June 2017 8,907 0 View
The endothelial cells have more affinity to positively surface of polymer scaffold, I want to know why ECs were attached to that nanoparticles which I called. Please help me.
07 August 2014 3,380 6 View
I want to to analyze MWCNT and TiO2 into the nanofibers without utilizing TEM, please introduce me to another method.
31 December 2013 2,860 5 View
May the MWCNT lose their L/D after 20 min sonication?
11 December 2013 8,081 3 View
After half an hour of MWCNT in a PVA solution depositioning into needle and interrupt feeding of solution.
10 November 2013 8,807 3 View
Which of the methods like water jet cutting, diamond cutting, laser cutting, etc. is more suitable to cut the carbon nanotubes reinforced epoxy composites into test sample to ensure the clean...
29 January 2021 1,354 5 View
I want to cut epoxy filled nanocomposite for FE-SEM analysis. What is the best way to cut it without resulting in any cracks or change in position or alignment of the particle reinforcement ? Also...
28 January 2021 7,084 5 View
I've synthesized a polyurethane-Ag nanocomposite and the product is dissolved in a two-component system i.e. DMF and DMSO. I wish to know of any ways that I can use to get rid of the solvents and...
27 January 2021 1,847 3 View
actually, I am degrading pesticides by using inorganic composites the pH of the pesticide in distilled water is neutral the pH of nanocomposite is also neutral then why maximum degradation takes...
23 January 2021 8,775 3 View
Given that the stress is equal to the force divided by the area(width*thickness), what change does the reduction in sample width make to the stress-strain curve? Does stress change occur...
09 January 2021 5,124 5 View
I am trying to do a kinetic study. I am using graphene- organic compound nanocomposites to show heavy metal removal. I have plotted the graph of nanocomposite against metal ions with respect to...
05 January 2021 8,667 3 View
Does Epoxy clay nanocomposite sample require surface preparation. I am going for Gold sputtering to make the surface conductive. I guess there is no need to clean or polish the surface beneath the...
04 January 2021 1,943 8 View
If possible any easy preparation method
31 December 2020 1,662 3 View
IV measurement and KPFM
21 December 2020 9,658 4 View
Need a lengthy PEEK with Zirconia based nano composite of 180 mm length. Which method is possible? Tried injection molding no proper mix. Solvent casting process is also very costly. Kindly anyone...
13 December 2020 4,329 5 View
