Intergration parameter optimization in Thermo LCquan software

15 March 2016 0 2K Report

Can anyone suggest how to optimize integration parameter (for eg. area noice factor and peak noice factor) for the thermo lcquan software.

Badges
Science topic

More Ketan Variya's questions See All

How does isolation time impact sloshing displacement in liquid storage tanks during seismic events?

How does the isolation time period impact the sloshing displacement of liquid storage tanks, and does this displacement tend to increase or decrease with an extended isolation time period?

19 January 2024 188 0 View

Position for tagging gene in Leishmania Donovan?

I plan to tag a gene in Leishmania donovani, and it would be a big help if anyone could help me decide the tagging position, whether it could be 5' or 3'. I also plan to do the DiCre Cas9 edition...

28 June 2023 4,442 0 View

Young's modulus (elastic modulus) and Heat Capacity of Nano-Polycrystalline Diamond (NPD)?

Hello everyone, can anyone provide me the folowing values for Nano-Polycrystalline Diamond (NPD)? - Young's modulus (elastic modulus (E)) - Heat Capacity Thanks.

29 May 2022 9,622 2 View

Material values for Nano-polycrystalline Diamond (NPD)?

Hello, it would be really helpful if someone could provide me some of the following values for Nano-polycrystalline Diamond (NPD): 1. Young's modulus 2. Poisson's ratio 3. Thermal expansion 4....

25 May 2022 3,197 0 View

I can't run Mendeley desktop on Microsoft Word 2019 MSO. Does anyone have an idea?

I have added plug-in but it does not work. it shows error 429

04 May 2020 8,080 2 View

Is the role of culture and national identity in foreign policy an under-researched topic?

How do we identify the culture of a nation-state or a subregion while examining its influence in the broader context of that concerned state’s foreign policy?

31 March 2020 4,255 9 View

Which method is precise and reproducible to determine concentration of 0.5% w/w Glutaraldehyde; Titrimetry or GC ? Describe the method in brief?

Glutaraldehyde, in low concentration at buffered pH 7.2, is used as a shipping solvent for Medical devices involving animal tissue. Suggest a accurate and reproducible method for determining assay...

12 March 2020 6,238 1 View

How can coarser grain size give higher nano hardness than finer grained structure of Ti alpha + beta ?

I did nano indentation on coarse grained alpha + beta & one fine grained lamellar alpha + beta structure. But the hardness of coarser grained was found to be higher than the that of the finer...

24 December 2019 2,445 4 View

I have a microstructure consisting of alpha beta titanium with very less percentage of beta(1 to 3 %). How can I find the exact % each phase?

I have tried doing ebsd but it is not giving a lot of un indexed points. So I dont know if the unindexed points are finer alpha titanium or beta titanium. During electro polishing the softer beta...

19 December 2019 3,231 7 View

How we will evaluate the rocking response when a base isolated system is subjected to the rotational component of ground motion during earthquake?

There is a single mass system at base of which a base isolated system is attached. So this whole system is a two degree of freedom system which is subjected to rotational component of earthquake...

08 February 2019 1,120 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

How to calculate CCS for Sodiated adduct ions and Multiply Charged Ions?

I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...

08 August 2024 8,329 0 View

Are there any instruments for studying time similar to the way it is in space?

There are a huge number of methods for studying objects in space, according to the senses (and not only). Mechanical, thermal, optical, acoustic, electrical, magnetic, based on particle beams,...

06 August 2024 7,102 0 View

Is there any Indian Company or Startups, from any universiy or IITS, which manufacture Gas Chromatography instrument , i want to make a custOmized G?

or we can collaborate

01 August 2024 6,705 2 View

Can the limit of quantification (LOQ) of an analytical method fall outside its linear dynamic range, or must it always be within it?

Can an analytical method's limit of quantification (LOQ) be outside its linear dynamic range, or is it always required to be within it? Please provide a thorough explanation supported by verified...

29 July 2024 7,198 9 View

Where to start the Analytical model for Dry sliding wear of metal surface ?

I am doing research on wear mechanism of the additive manufactured metal parts under dry condition. Please share the reference to start the analytical modelling of the wear prediction.

29 July 2024 6,115 0 View

How to determine method detection limit in an analytical method?

I know the difference between instrumental LOD and method LOD but my query is - in case of any sample whose concentration is zero or not detected by the instrumental LOD, is it possible to get...

24 July 2024 6,592 5 View

Guidance needed for preparing the hydrogel samples for the XRD instrument?

I'm working with a hydrogel sample and I'd like to perform XRD analysis. Can anyone offer guidance on preparing the hydrogel for the XRD instrument? Specifically, I'm unsure about the best method...

20 July 2024 3,611 4 View

How indoor air pollution is sampled using TSI quest EVM air monitoring instrument?

please suggest the research paper related to the instrument is used in it.

16 July 2024 8,453 1 View

Can someone help with the instrument configuration in Profex using Rietveld Refinement?

I am trying to configure the instrument in Profex but I can't get a chi-squared value below 9.65 for LaB6. This is the configuration of the equipment, which is a Bruker D8 Advance with a Linxeye...

14 July 2024 4,767 1 View