Dear sir, I am Vemuri srs Praveen Kumar. as the simulation studies for the solar cells may have antireflection coatings.
how these antireflection coatings were simulated and which software platform was used by you, sir.
kindly guide me sir. i am interested in modeling of such antireflection and high reflection coatings for displays and other applications.
Thanking you
https://www.sciencedirect.com/topics/physics-and-astronomy/antireflection-coatings
I have made a very good results with FilmStar software:
https://ftgsoftware.com/fsindex.htm
The simulation vs. experiment was +- 2 % of reflectivity. If you are interested I can run some simulations for you if you send me the coatings parameters. Write me via messages.
Dear Dr. Pavel Mareš,
Thank you for information
Please send me the free version of the 64-bit FilmStar software if available.
Best regard.
I highly recommend OptiLayer Thin Film Software for the design and analysis of all types of optical coatings. I used OptiLayer for over a decade to design optical coatings at Sandia National Laboratories, and found its capabilities and user friendliness to be excellent. My positive experience with OptiLayer led me to become an OptiLayer distributor.
OpenFilters is a free and open source software that can serve your purpose for designing AR coatings. It is equally capable like any commercial software.
You can freely download this software from the following site:
https://www.polymtl.ca/larfis/en/links
- Badges
- Science topic