I am working on part of a watershed which has two tributary inlet and one total outlet, I am trying to model this part of the water shed, arcswat is giving options of inlet and point source, I am considering inlet at the tributaries and trying to insert daily record of inlets according to swat user manual. but it is not accepting.
Any one have faced this type of issue please share the solution.
What version of ArcSwat are you using ?. I used both options inlet and point source and worked fine. It will be difficult to say what went wrong without examining the project, but if the inlet and or point source points (note that inlet and point source are used differently) are defined during the delineation step, then adding the daily records should not be a problem.
Dear Michel Rahbeh
Thanks for answering.
I am using ArcSWAT 2012.10_5.21 running on arcgis10.5.
The inlets that I have considered was done during watershed delineation.
The text file and location of inlets are attached below.
I am facing this issue as well. In which format should I prepare the input daily records. I tried reading the manual but unable to get a clear picture. Could zou please share the .txt file for the point source daily record. Manny Thanks
Hi Karisma & Mohammad, if you are using ArcSWAT 10.5 or higher you must insert extra 10 columns with any name as headers (for example Salt1, Salt2, and so on up to Salt10) filled with 0's at the end of the input column.
Important, if your point source records are for a particular period in your simulation, you still need to provide data for the entire simulation as a bunch of "zeros".
There is an example attached to this message.
source: Error while inserting daily inlet discharges in ArcsSWAT (google.com)
Is there a swat output file from a former subbasin run? I am trying to get around the Access File size limit by making parts of my watershed into separate sub basins. Thanks, I am trying to do a watershed in the coastal area of Oregon. Filipe Pinhati
Hi,the error which was occurring when i was trying to add daily flow data is now solved after i created a new project. However I encountered a new error during swat run. An error occured：forrt1: severe (24): end-of- file during read, unit 556, file D: \ex0331 \Scenarios \Default \TxtInOut\4i. dat.
The file 4i.dat was automatically created by swat in the Scenarios\Default\txtinout folder as per my inlet input.
I request all the members to kindly have a look and help me solve this problem.
Thanks.
- Badges
- Science topic
- Similar topics
- Geoscience
- Asia
- India