In Soil Analysis, 5g soil sample extracted and various physico chemical parameters found in ppm. (Example: Nitrate, TOC, TNM, Sulphate, etc) in this case how to report ppm to g/kg?
Dear Bala,
Generally, you have to report the soil result on the dry weight basis.
level of constituent in soil (L)=M1/M2
where,
M1= weight of constituent (TOC or TNM or Sulphate )
M2= Dry weight of soil
Therefore,
L in ppm=M1(in mg)/(M2 in kg)
=M1(in mg)/(5/1000)kg
If you need In g/kg
L in g/kg = (M1 in g)/(M2 in kg)
If you need to converte X ppm to X g/kg
1ppm = 1/100000
X ppm= X mg/1000000 mg
=(x/1000)g/(1000000/1000000)kg
=(x/1000)g/1kg
=(x/1000) g/kg
that mean If you divide your ppm value by 1000, result is in g/kg
Piyal Aravinna
Hi Bala,
1ppm=1mg/kg ========> 1mg/kg= 0.001g/kg
A. G. Piyal Aravinna Mehdi Moameri Lawrence Mayhew
Gone through various methods for extracting humic acid and fulvic acid contents but not sure about calculation part.
06 July 2019 8,426 3 View
For my compost sample wish to analyze CEC. Almost literatures give me idea to extract but wish to know best simple method to extract as well as analyze the compost sample.
05 June 2019 1,207 3 View
For my compost sample wish to analyze HA & FA. Almost literatures give me idea to extract but wish to know best simple method to extract as well as analyze the compost sample.
05 June 2019 4,887 2 View
Need Clarity about calculating Soil carbon, Soil organic Carbon, Soil Organic Matter,etc.
11 December 2018 7,912 3 View
In my soil analysis i used uv-vis spectrophotometer to determine nitrate nitrogen and TOC-TN analyzer to determine TOC & Total Nitrogen. I got very high Nitrate nitrogen values than Total...
09 October 2018 6,106 4 View
we are usually extracting soil by extractant such as water, kcl etc. while converting ppm to mg/g having doubt on using simple conversion.
08 September 2018 3,361 2 View
Usually we extract soil contents in extracting solution and estimate the values in ppm but how can we mention the contents of soil in mg/g.
08 September 2018 7,800 7 View
Being a research associate interested to work in team for review paper so that draft a good article for scopus indexed journal. mail me your interest [email protected]
07 August 2018 4,176 0 View
Various methods are available to analyze compost but by using spectrometer and traditional titration methods trying to analyze compost effectively and accurately so standard methods and procedures...
06 July 2018 9,851 3 View
I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.
11 August 2024 9,101 4 View
I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?
11 August 2024 5,138 1 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,770 4 View
Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...
10 August 2024 7,180 0 View
I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...
10 August 2024 7,429 2 View
I have been doing the m6A dot blot for a while with no improvement, I am extracting the RNA, and I can see the dots although the three biological replicas give a different reading on the memberan...
10 August 2024 8,539 5 View
How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?
09 August 2024 7,718 0 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View
Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...
07 August 2024 8,106 4 View