Hi

have a look at this

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=6213581&url=http%3A%2F%2Fieeexplore.ieee.org%2Fxpls%2Fabs_all.jsp%3Farnumber%3D6213581

Hi Mohammad,

Thank you! It is very helpful!

Huiping

Hello again, we are studying the demand response by industrial loads, for industrial loads, it has the following advantages:

1, power change is huge (e.g. 20~80 MW)

2, infrastructure for demand response is already installed in the industrial plant, e.g. communication, control, measurement, etc.

3, the plant operator has very strong economic incentive to provide demand response in practice

it also has the following disadvantages:

1, the scheduling of a plant could be complex

2, the power change is not fine enough (if the power system only needs 0.1 MW change).

Cannot write down all the details, but relevant work is available at my web page here

https://shawxiaozhang.github.io/

I'll be happy to chat about the details :)