In DSC analysis, how does undercooling of an alloy change with increasing cooling rate?

28 April 2020 0 10K Report

Some papers claim the higher cooling rate, the bigger undercooling; however I found that higher cooling rate made smaller undercooling, meaning alloy starts freezing earlier than the case of low cooling rate, meanwhile the cooling peak was broader.

Badges
Science topic

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

How can I verify my centrifugal fan design for electric motor cooling?

I have radial blade centrifugal fan design which will be mounted on exhaust side of electric traction motor. The fan will be mounted on same motor shaft inside the housing. How can I verify that...

23 February 2021 2,390 3 View

Any interests in participating to an experiment in space?

Hello, The UN Office of Outer Space Affairs has a program called access to space for all that enables institutions to have hands on expertise related to access to space. There are three elements...

22 February 2021 7,980 3 View

Thermal and mechanical properties of concrete and steel after cooling?

How do the thermal conductivity, specific heat capacity, plastic strain, critical compressive displacement, and thermal expansion of both hot-rolled steel and concrete change after cooling based...

15 February 2021 1,385 5 View

Dealing with BMDM seeding and RNA extraction ?

biomedical master student here , i am dealing with mice BMDM and would like some help , i seed 0.5 x 10^6 cells/per well in a 6 well plate but when i extract the RNA i get a very low yeild , i...

15 February 2021 1,102 5 View

How long can agarose embedded tissues be kept?

I am embedding PFA fixed tissues in low melting point agarose prior to sectioning and I am wondering how long can these can be kept whilst maintaining tissue integrity and fluorescent signal?...

14 February 2021 6,688 3 View