11 June 2024 0 4K Report

In Bismuth borate glasses, concentration of boric anhydride is changed always, instead Li2O of ZnO or CdO. Why ?

In most of research journals concentration of network formers are changed metal oxide.

Please explain

More Aditya Vamshi's questions See All
I am trying to obtain microstructure for Mg-Zn-Sn alloy?

Any suggestions with respect to etchant composition and holding time?

27 July 2024 6,924 2 View

How to Precipitate of Glucose?

Does someone know any precipitating agent to precipitate glucose from 10 % glucose solution? or to remove glucose from solution

13 June 2024 438 0 View

What amount is good for making an electrodes in supercapacitors? Many of the authors used 0.5 mg and other used more than that why?

Is there any advantage/disadvantage for choosing less amount (i.e., 0.5 mg) Or in choosing higher amount (1 or 2 mg) ?

06 June 2024 6,938 2 View

How to colour code depth information in image J software?

i have tried processing the z stack confocal image to represent the various depths of the sample by using Depth coding (Image › Hyperstacks › Temporal-Color Code). But the scale bar i get is in...

23 May 2024 9,618 0 View

What are the most effective techniques for mitigating overfitting in neural networks, especially when dealing with limited training data?

What are the most effective techniques for mitigating overfitting in neural networks, especially when dealing with limited training data?

11 April 2024 8,175 2 View

Is it possible to make predictions utilizing Artificial Neural Networks (ANN) for a solitary univariate variable using python?

Forecasting using ANN for a single variable. Say, inflation.

03 April 2024 6,529 4 View

How to improve the adjusted R square value of a multinomial logit model (MNL)?

I am performing multinomial logit (MNL) on discrete choice data. I wanted to understand how I could improve the value of the R square of my model.

30 March 2024 9,304 2 View

What role does the complexity of the dataset play in the susceptibility of deep learning models to adversarial perturbations?

What role does the complexity of the dataset play in the susceptibility of deep learning models to adversarial perturbations?

09 March 2024 710 1 View

What approaches can be used to enhance the interpretability of deep neural networks for better understanding of their decision-making process ?

What approaches can be used to enhance the interpretability of deep neural networks for better understanding of their decision-making process ? #machinelearning #network #Supervisedlearning

04 March 2024 8,100 3 View

What are the challenges and opportunities in deploying machine learning models in real-time systems with stringent latency constraints?

What are the challenges and opportunities in deploying machine learning models in real-time systems with stringent latency constraints? #ml #industry5.0

04 March 2024 1,687 1 View

Similar questions and discussions
Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,622 3 View

What is the solubility of Iron (+3) in Bismuth Oxide?

Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco

29 July 2024 2,161 1 View

I have synthesized a composite of ZnO and In2O3 with variations in ZnO content. In Raman , what is the peak observed at 130 cm-1?

Dear all, I have noticed, as the ZnO content increases, the Raman intensity at 100cm-1 also increases. However, there is a peak nearby at 130 cm-1, which I could not find in any paper related to...

28 July 2024 5,410 1 View

Waht is the effect of isoelectric point on MB dye photodegradation by ZnO nanoparticles?

Recently I have submitted an article regarding MB dye degradation by ZnO nanoparticle. I received a suggestion to include the discussion on the effect of pH. I want to know what is the impact of...

19 July 2024 4,866 1 View

Does the potentiostat have to be in a fume hood when polymerising the PANI?

I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...

10 July 2024 2,936 3 View

Can other standards be used to generate IRF file instead of LaB6,Si etc.,,, for Rietveld Refinement?

Hi, my research involves in ZnO synthesis. I have performed rietveld refinement of my samples and obtain a good fit using Fullprof suite software. However to obtain the crystallite size, the IRF...

07 July 2024 3,525 3 View

Where to source glass rings compatible with cell culture?

Hi all, I am looking glass cilinders that have an open flat bottom and top. Preferably with the inner diameter in the range of 2 cm. It's similar to the ones found on multi-electrode arrays for...

06 July 2024 5,846 1 View

What is alternative for PMMA?

If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...

03 July 2024 2,370 1 View

Why PDMS is not hardening ?

I use PDMS to build a microfluidic system, but it is not hardening at all, although I use TEOS as a cross-linker and also ATPES in a ratio of 1:10, and it's been 3 days at 80 degrees of 3 ml cast...

01 July 2024 603 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close