In ASCE 7-10, which site class( A-F) can be taken as Medium soil condition as it is given i IS 1893-2002?

More Bhavik Adajaniya's questions See All

Why will a sample have a crack initiating away from the centre in a three-point bending test?

I've basically completed a few experiments during which my brittle samples (metal-ceramic composites) had a crack initiation far away from the centre of the specimen being tested during 3-point...

09 November 2018 7,164 0 View

I want to remove ammonia by RO. My feed contains 10000 ppm of NH3. I want to remove it by RO and get high NH3 concentrated stream. Any suggestions?

I am trying to use RO modelling software but not getting recovery more than 40%. Can anyone suggest how to increase recovery with such a highly concentrated feed? My water chemistry is not...

13 February 2018 5,111 3 View

I have high concentration of ammonia in my feed. I am using SBR and getting 100% nitrification but not getting 100% denitrification. Please help?

Not getting 100% conversion of NO3 to N2. feed: CBOD5 -150mg/L TSS -200mg/L Ammonia N -60mg/L TP -10mg/L

04 February 2018 2,956 4 View

How can i set design procedure as "composite column design" instead of "concrete frame design"?

I want to design the composite column in ETABS by section designer command method. After the column section made in section designer i assigned this member in building model but in after the...

14 March 2017 9,316 3 View

How to get composite member interaction curve in sap2000?

Is it possible to plot an interaction curve for composite member in sap2000? How can I get required data for stainless steel? Data...

08 January 2017 3,140 3 View

Is stress strain graph for any material automatically generate in SAP200?

I need some idea about stress strain graph for composite. As we know the stress strain graph for concrete and it is already plotted in Sap2000 which...

04 January 2017 4,131 2 View

How can i find the cross section areas of concrete in composite column?

for stainless steel encased rcc column, is there any specification in INSDAG or other country code?

16 September 2016 8,358 4 View

Weird Bioanalyzer ladder: What could have happened?

I did two runs on the bioanalyzer and got ladders that looked really weird (shown below). And I am just wondering what could have happened? Any ideas?

14 April 2015 2,589 2 View

Can anyone provide me resources to identify limpet species ?

I am working on Limpet diversity, need to authority material for identification. can anyone help or guide me for that?

06 August 2014 8,305 3 View

Post fever retinitis - 1 minute survey!

Dear All, How often you treat one condition and think that's done, but it comes back and surprises you. One such condition is Post fever retinitis. We would like you to take this 1 minute survey...

01 January 1970 8,727 0 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?

29 July 2024 7,714 4 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

Ternary in Electrical Engineering?

Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...

28 July 2024 5,771 2 View

What topic or subject does Production Engineering need to address more?

Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?

27 July 2024 648 3 View

Can a shoot-through event of a tri-state digital buffer cause momentary Hi-Z state?

// interested in the difference between floating events and short circuits.

22 July 2024 6,565 0 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

Can you suggest reliable procedures to get displacements from accelerations in frequency domain ?

I have identified many solutions. I need suggestion from somebody with application experience of this topic to identify the most reliable and robust procedure.

21 July 2024 3,465 5 View

Why do fish have fishy odors naturally ?

Chemical Engineering /Food Engineering

20 July 2024 4,152 4 View

What could be the possible reason that sintering of polycrystalline diamond fabricated with tape casting has suddenly started failing?

I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...

16 July 2024 3,212 5 View