Does soil suction varies with normal stress?

At different depth of soils, normal stress changes. Soil suction affects the shear strength. But, I was wondering if the soil suction changes with depth or normal stress.

02 March 2018 3,771 6 View

Is there any range of cohesion values for coarse-grained soils?

I am working on cohesion and friction angle of different types of soils. The shear strength of coarse-grained soils are different from that of fine-grained soils.

06 July 2016 8,101 6 View

I am curious to know how friction angle and cohesion parameters are chosen for a retaining wall design?

05 June 2016 8,480 6 View

Has anyone done direct shear test on the same soil at different shearing rate such as 1mm/min, 0.5mm/min etc ?

I am working on shear strength of soils using direct shear test.

04 May 2016 1,728 11 View

About dry density of soils, what was lowest dry density value you have obtained in the lab?

I have got a dry density of 10.2 kN/m3 for coarse-grained soil sample.

04 May 2016 6,250 3 View

How to address this issue in the analysis of Real-Time PCR results?

To dear Researchers, I was analyzing a series of concentration for estimation of Real-Time PCR efficiency. The concentration was 1:10. I used MS-excel to evaluate Slope. The result of slope was -8...

01 March 2021 8,683 4 View

Can I download BibExcel for MacOs?

Hi everyone, I would like to ask how I can download BibExcel software for MacOs? There are some links which are supported by Windows but I could not find it for Mac. or is there any other software...

01 March 2021 652 1 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

High aspect ratio hexahedral mesh optimization solver?

I am interested in evaluating mesh optimization solvers that converge to high aspect ratio unstructured hexahedral grids. In other words, I am interested in a solver that optimizes warpage,...

26 February 2021 7,279 2 View

Error in comsol?

Dear respected researchers, while performing CFD analysis in Comsol it's showing like this Error: Nonlinear solver did not converge. The maximum number of Newton iterations reached can...

24 February 2021 249 3 View

Implementation of chance-constrained optimization problem via scenario approach?

23 February 2021 7,826 2 View

Anyone with some Transgenomic Wavemaker software? Seeking help from the chromatography community?

I am trying to seek out some Transgenomic Wavemaker software (happy to purchase a computer too) to operate a fraction collector. The only way to connect to the fraction collector so far is to...

23 February 2021 9,181 1 View

Best excel chart to compare algorithms' running time?

Hi I want to compare the running time of robotic path planning algorithms. The grid size is 8X8. I have 100 scenarios of start and goal positions.. Each scenario is run in three obstacles ratio...

22 February 2021 621 1 View

Should I use Pressure Based Solver or a Density-Based Solver?

Dear researchers, I want to simulate a flow (air) in a wind tunnel, and I want to integrate a fluidic actuator inside it in order to control the separation of the boundary layer. At the blower...

22 February 2021 4,882 3 View

How to open an old ".MTS" file containing spectroscopic data?

Hi supreme hive-mind of the internet, we have some old *.MTS files that are supposed to contain spectroscopic data, probably some coordinates and a long list of single line spectra. Basically,...

16 February 2021 9,385 2 View