What is basic difference between swelling pressure and surcharge pressure of expansive soil?

What is basic difference between swelling pressure and surcharge pressure of expansive soil?

06 July 2018 9,986 1 View

Is key note article (published in journal) count as research article?

Is key note article (published in journal) count as research article?

05 June 2018 834 8 View

Suggest some books on XRD, SEM, and EDX of material?

Suggest some books on XRD, SEM, and EDX of material?

04 May 2018 3,023 6 View

I want some literature on prediction of swelling or swelling pressure of soil?

Swelling/Swelling pressure of soil= f(index properties of soil/granular pile (or sand/stone column) material, size/ s/d ratio/ or any other parameter)

31 December 2017 9,623 4 View

I want literature on Shrinkage Induced Pressure/ Shrinkage pressure of expansive soil?

I want literature on Shrinkage Induced Pressure/ Shrinkage pressure of expansive soil?

31 December 2017 8,022 1 View

How to write reference of patent ?

For example, we write paper's reference like author name (year). "title", name of journal, vol. no. (issue no.), page no. As it is how to write patent's reference. Thanks in advance.

11 December 2016 6,888 0 View

How to write reference of any chapter of book/ manual in ASCE journal pattern?

02 March 2016 6,198 1 View

How can I determine the present serviceability index (PSI) for rural roads?

I am working on pavement performance so need to determined PSI.

09 October 2015 1,535 5 View

What is the significance of LL and PI on swelling pressure of black cotton soil?

09 October 2015 7,180 0 View

What is the effect of index properties on expansive soil/ bc soil?

05 June 2015 1,143 7 View

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

Buffer Exchange using column packed with sephadex G-25 effect on protein concentration?

Hello, If i am doing a buffer exchange for an antibody of 1mg/mL, does the elution lose protein in the process of buffer exchange? For example, if i flow through 500 uL of 1mg/mL sample, and...

03 March 2021 6,299 3 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

No title

03 March 2021 5,360 2 View

Is there any test to determine the cardiovascular risk of patients with obesity? from the perspective of obesity?

We found tests to determine cardiovascular risk taking into account lipid profile, blood pressure, age, history of diabetes, other laboratories. But when weight is involved, there is a paradox. I...

02 March 2021 6,036 1 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What SPSS analysis should I run with one IV (with two levels) and two DVs?

Hi, I am trying to figure out which test would be most appropriate to run for the following question: Is there a difference in task blood pressure between smokers and non-smokers? There are two...

01 March 2021 8,235 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View