i am having kithley 195 A digital multimeter , kithley 6221 dac and ac source , kithley 6220 , and agilant (keysight )2900 ? what measuremnet system can i make from these ,
requirements
To make some measurement system
to interface in pc
( GPIB CABLE IS AVAIALABLE )
Dear Yogesh Singh ,
The most important thing in measuring the I-V curve of resistive switching devices is to know that these devices have an S curve I-V characteristics. So, to measure an S-curve you have to have a controlled current source, the device under test and a current sensing resistance where these elements are all connected in series. Then one can use an ammeter to measure the current and a voltmeters to measure the voltage across the device. Both the reading of the voltmeter and the ammeter can be conveyed to the computer through the A/D coverers where the both I and V can be acquired. To get one complete I-V curve one has to scan the value of the current source across the required range. This can be made by controlling the current source by the computer.
Best wishes
Please note that you
can find a good
example in my book
Conference Paper The American University Laboratories For Electrical Engineering Part 1
I hope you like it.
- Badges
- Science topic
- Similar topics
- Chemistry
- Nanotechnology
- Nanostructures
- Thin Films