How skin conductance level can be measured?

I'm looking for a device to measure skin conductance in some experiments.Can somewone help me please?

02 September 2019 1,981 1 View

Kindly how much volume of methane should i take from methan gas cylinder to add it to my broth culture as a gas reaching the concentration of 1.3mM?

the paper say that: The CH4 gas (99.9%, v/v) from a compressed gas cylinder (Nanjing Special Gas Co., China) was bubbled into 500 ml distilled water with a rate of 160 ml min-1 for least 30 min at...

28 December 2018 7,875 5 View

Is hydrogen gas in a saturated hydrogen rich water solution in a plugged flask is stable at high temp ( 42) degree celesius?

is hydrogen gas in a saturated hydrogen rich water solution in a tightly-closed flask like those in photo attached down is stable at high temp ( specifically 42 degree celesius or it will...

15 December 2018 428 5 View

If a paper say in method that 100 ml of liquid media are put in 250 ml flask . and due to a limited space is it possible to put 50 ml in 125 ml flas?

if a paper say in method that 100 ml of liquid media are put in 250 ml flask as a media for Ganoderma lucidum fungus mycelial stage . and due to a limited space is it possible to put 50 ml in...

06 December 2018 9,126 2 View

Are ITS1 and ITS4 primers are ok for molecular work on ganoderma lucidum especially for ezymes and genes related to stress tolerance ?

Are ITS1 and ITS4 primers are ok for molecular work on ganoderma lucidum especially for ezymes and genes related to stress tolerance ?

21 November 2018 6,290 3 View

I am looking to purchase high purity (6N) Mg metal. Could anybody please tell me any company who can offer better deal?

Mg metal of different form like rod, ingot slug of 10-20 mm size is preferred. Thank you

11 July 2016 6,792 4 View

How justified is showing subjective measures instead of objective measures to meet the data quality dimensions?

17 November 2015 1,426 1 View

How can we estimate length of interval for hurst exponent calculation ?

01 January 1970 4,114 2 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

How can the use of Jolly Phonics improves the quality of reading, speaking and writing in rural disadvantaged communities in Papua New Guinea?

Jolly Phonics reading program is an effective way to teach early reading to young learners. How can lectures at the university prepare early childhood student teachers to teach Jolly Phonics to...

03 March 2021 3,731 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View