I want to cut a cylinder to cone by means of specified tools. The cylinder rotate about z axis and tools is rotating too. It's simulating of turning machine.
Which mesh is best to simulate?
I think you'd better upload your figures, which is good for understanding your aim.
Thanks ... you can imagine that i just want simulate turning machine in abaqus
Do any one know how can manufact stent?
10 November 2018 7,243 4 View
Which software is better to simulate lathe work? And is easy to use too.
10 November 2018 6,082 3 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
I need the python code to forecast what crop production will be in the next decade considering climate and crop production variables as seen in the attached.csv file.
05 August 2024 2,977 3 View
Hello everyone, I am currently working on a research project that aims to integrate machine learning techniques into an open source SIEM tool to automate the creation of security use cases from...
04 August 2024 3,196 2 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
Hello I want a suitable journal in the field of remote sensing and machine learning to be judged quickly. Thank you for your guidance Thanks
01 August 2024 1,799 4 View
Hi, I'm curious to know if data on chemical compounds from PubChem, such as water solubility properties, can be used to train a machine learning model for commercial purposes. Will this infringe...
30 July 2024 8,707 1 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View