Did you have used a reducing agent or stabilizer which absorbs in the visible spectrum. You do not have washed the silver nanoparticles.
Best regards.
The peak at 450 nm is due to surface plasmon resonance from Ag nanoparticles. Whereas, the 710 nm peak is due to silver oxide. There are several silver oxides with different energy gap from 1.2 - 3.4 eV.
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
I have conducted molecular marker amplification experiment by PCR and performed PAGE with silver staining. Now i have to score all my gels for further genetic analysis. Manual gel reading is...
12 July 2024 7,145 2 View
Silver Nanoparticles docking with alpha amylase and alpha glusidase .
11 July 2024 6,883 2 View
I synthesize silver nanoparticles ,and reserve it in water. Then, when I sonicate it some minutes or longer ,it couldn't be dispersed, most of them aggregate .Otherwise ,when I sonicate several...
09 July 2024 7,335 0 View
I am in the process of roughening a silver electrode for SERS measurements using the latest version of CH Instruments. Most procedures in the literature mention sweeping the potential from -0.3 V...
30 June 2024 4,639 3 View
I am very new to the material modelling in GDIS. So, I want to learn how to model a nanostructure specifically core-shell in GDIS.
28 June 2024 5,224 0 View
After finish the synthesis of nanoparticles.and nanoplates of silver how to take out those as solid/powder form from the solution. Please give a solution of u already done that and succeeded by that
27 June 2024 692 1 View
I am trying to synthesize silver nanoparticles from a plant extract. But lower concentration of AgNO3 solution is not enough to obtain my desire UV spectrum for the characterization. So I want to...
25 June 2024 3,829 0 View