I am unable to get the scattering parameters of mentioned structure in CST Simulation?

More Junaid Ahmed Uqaili's questions See All

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

How we can measure the Salt level/concentration in the field? or how we can measure the pH of soil in field?

I am visiting different high salt effective areas to collect plant leaves and soil samples. Before sample collect i must want to know the pH on soil. Is their any rapid fast and reliable method to...

25 October 2020 3,732 2 View

What Criteria to consider in PLS SEM Construct reliability and validity?

Hello, I am currently investigating some reflective research models with SmartPLS and had a few questions about checking the Construct reliability, validity and discriminant validity. Can i...

04 September 2020 9,790 3 View

Measuring laser intensity in PPFD (Photosynthetic Photon Flux Density)?

Hi, I run my experiment with either red or green laser and I use the PPFD meter to measure the intensity before my experiment. Does it make any sense for monochromatic light? What would be the...

26 July 2020 1,095 1 View

How to reduce intensity of Low Power Laser?

I am using following laser for microscopy. https://www.picotronic.de/picopage/en/product/detail/id/672 Although it is already low power pointer laser I still need to reduce its intensity. I...

13 July 2020 4,655 18 View

Sample size calculation based on hospital population?

hi, if we are doing a single centered study, can we estimate/calculate sample size based on patients in that hospital? e.g i want to conduct a research on stroke patients. so my population will...

22 June 2020 5,217 5 View

What does it mean if the status date changes while the status remains "Editor Assigned"?

After getting a minor revision, a revised version of manuscript was submitted three months ago to a reputed journal. The status changed to " Editor Assigned" after two days. The status date...

07 June 2020 3,462 8 View

How can I import a user subroutine into Abaqus component in Simulia Isight?

For optimization my material parameter I use Isight software. I have an input file that simulates the material model via UMAT subroutine. How can I import this inp. file in the Abaqus component of...

14 May 2020 3,552 3 View

Has anyone compiled a list of Call for papers on COVID-19 ?

The scientific community has been efficient in response to the fight against COVID-19 with research in multi-dimensional fields ranging from virology to artificial intelligence. We need a list of...

14 May 2020 3,636 12 View

How to calculate Reaction rate K?

Dear all, I am trying to develop a voltammetric model in COMSOL multiphysics. However I still need to calculate this reaction rate constant K0 for my corrosion reaction and feed it to my model...

01 December 2019 167 2 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

How to analyze a particular region of my simulation box in GROMACS?

Hi, I am using GROMACS 5.1.4 to simulate water in contact with a surface. I am only interested to calculate some properties of water near the surface. Let's say at a distance of x nm from the...

03 March 2021 9,989 2 View

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru

02 March 2021 1,787 2 View

How to get onecolumn document from standard IEEE ACCESS LateX template?

I have prepared a manuscript in IEEE Latex template, but for some purpose, I need to prepare a word file as well (detailed format is not required). Compared to two column .tex file, one column...

02 March 2021 1,830 3 View

How can the modification of garden soil cause global warming?

Hello, I am working on a soil project and I found a primary research article that tests how the modification of agricultural soil can cause global warming, using a thermal collector, however I...

02 March 2021 7,161 3 View

How to get started building and analyzing a UTAUT model?

Hello all, I need help getting started building and analyzing a UTATU model. I have a survey ready with some questions but I had some confusions on UATAUT and on how to analyze the data. I will...

02 March 2021 9,271 1 View

Help request in CST microwave?

im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...

02 March 2021 2,246 2 View

Does anyone know how to plot my station to a section plot on Ocean Data View (ODV)?

I made a vertical section plot with WOA .nc file on ODV, and now I want to plot my stations (csv. file) in it. Does anyone know how to import my points to the section? They are two different...

01 March 2021 3,610 1 View

Which cell line should we use to perform biological dosimetry experiments?

We are preparing some experiments based on irradiating cells under different conditions in order to evaluate the effects in terms of DNA damage, genetic expression, etc. As our project is...

01 March 2021 3,355 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

Malcolm White

If you model it as it would actually be made, you will get the correct results.

Does it have a ground? If not there will be a big reflection at the SMA. Is it microstrip, or stripline, or a free-standing metal strip? Is the SMA connected to the ground? What happens if you get rid of the side branches so it is just a straight strip? What impedance is that? Does it match the 50 ohm coax?

Junaid Ahmed Uqaili

Thanks for your answer. Actually i designed this structure without SMA. Because there are no SMA in published article that i am trying to follow. The problem i am facing is how to excite the structure.

Secondly, i have used ground. And SMA is connected with groud as well. This is stripline basically. I can share the simulated file, if you can help me to find the solution. I would be thankful to you in this regard.

CST will excite stripline if you define the dielectric face containing the end of the line, with the ground around it, as a waveguide port.

I tried the waveguide port by picking face of strip line to ground. But i couldn’t get the results.

Smrity Dwivedi

Hello,

Some related papers are attached to solve the problems.

Papers are given below.

Thanks,

Smrity Dwivedi Thank you so much. I will for through these papers.

The face you need to select is the dielectric filling the port.

Malcolm White Sir can I share the simulated file. Maybe you can find some mistake or suggestion for me. I would be thankful to you

Malcolm White Sir i am unable to send you message on RG. Please share your email or message me here.

I don't want to publish my email. Other people have managed to message me on RG, but I don't know how it is done. I haven't been able to find how to message you, either! You can place your file on here if you like.