How will be the centerline velocity of spray droplets in internal mixing twin fluid atomizer?

More Raju Murugan's questions See All

Which transition metal salt precursor is best for doping? Why?

I would like to synthesize a transition metal doped TiO2 via solgel method. Hence, I would like to know which metal salt precursor to choose among Chloride, Nitrate, and Sulphate. A clear...

27 February 2021 4,285 3 View

Sequence of an unknown Oligonucleotide ?

Hi All, I do have a single-stranded oligonucleotide of 100 - 150 bases synthesized and the sequence is not known. How would I proceed to know the sequence .

04 February 2021 5,614 3 View

How to separate solid NHS-folate during the folic acid activation?

Am functionalizing the metal nanoparticle with folic acid. in the process I have taken folic acid in DMSO and added DCC and NHS to activate the carboxylic acid group of folic acid in the standard...

01 February 2021 9,890 3 View

In online GC-FID/TCD connect to flow reactor, why I am getting instable peak area in FID in every injection under same conditions?

We have online GC-FID and GC-TCD (Mod: 2014) connected with flow reactor system. This GC-FID/TCD is connected to a gas line coming from flow reactor system which I used for cascade reaction. In...

11 November 2020 4,999 6 View

Please suggest that the way of obtaining the concentration (in mol) from the gas mixture (N2=98%, Ethylene=1% and Butadiene=1%) is correct or not?

I have a gas mixture (N2=98%, Ethylene=1% and Butadiene=1%). I want to obtained the molar concentration of each components for 1mL volume of the gas mixture. For that purpose, I have used the...

29 September 2020 6,233 1 View

What should be the minimum and maximum dopant concentration to achieve best photocatalytic activity of any semiconductor?

I am working on modifying the band structure of TiO2 semiconductor for visible light photocatalytic activity. For this reason, I would like to dope the metal and/or nonmetal ions into the TiO2 to...

23 September 2020 1,063 6 View

How to calibrate a GC-FID where two of the components are gas phase & others are in liquid phase?

I am new in GC-FID and TCD measurement technique. I will analyze a gas stream at high temperature above 190 oC in the GC-FID system. I want to construct a calibration curve for the mixture of...

08 September 2020 6,073 3 View

Anybody has an experience on the DSSAT 4.7 model ? please let me know?

I am working on the DSSAT model, its a little bit harder than I think please help me?

04 May 2020 5,708 3 View

Why are the COVID-19 infection and mortality rates lower in India?

It is intriguing that the number of reported cases infected or died due to COVID-19 infection in India is comparatively much lower than the United States (US), China and other European countries.

18 April 2020 2,170 22 View

How to convert netcdf file in *.nc4 format to .csv or excel format containing data on planetary boundary layer height?

Monthly average data on Planetary boundary layer height is downloaded from disc.gsfc.nasa.gov. It is in netcdf file in *.nc4 format. How to convert this into .csv or excel format ?

15 December 2019 8,137 3 View

How to analyze a particular region of my simulation box in GROMACS?

Hi, I am using GROMACS 5.1.4 to simulate water in contact with a surface. I am only interested to calculate some properties of water near the surface. Let's say at a distance of x nm from the...

03 March 2021 9,989 2 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

Can we distinguish the type of free fluid inside the pelvic and abdominal cavities whether blood or serous fluid using the ultrasound?

during ultrasound examination of acute abdomen, sometimes we see free fluid , can we know the type of fluid ,whether blood or not , using ultrasound only? if yes , what are the sonographic...

01 March 2021 7,476 4 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

Vikash Kumar Singh Chauhan

It actually depends on the momentum transfer between the phases. liquid droplets generally tends to increse their velocity by gaining momentum from the other phase during their passage in the potential core of the continuous phase.

This answer is only valid if the potential core is free from any interference.

You Can follow the paper Article Heat transfer behaviour of a dilute impinging air-water mist...

Raju Murugan

Thank you sir

I will go through this paper.

Thomas Frank

Question: is the core of the atomizer flow free from flow recirculation?