I was asked by one client for the test procedure of parylene coated PCB from SULFUR attack.
Is it any professional method or standard to perform this precisely and quantified ?
Thank You !
First, I'd ask some clarifying questions about the environment, namely what kind of sulfur compounds they expect to contact their PCB.
Second, ASTM G85 Annex 4 contains a SO2 modification to ASTM B117, which may be used to provide comparative results between coating systems.
Thank you very much Andrew.
Hi Samuel, What kind of situation will cause the current leakage in Parylene insulated electrode ? film degraded or as coated ? What kind of Parylene variants did you coat ? Nelson
01 January 1970 8,437 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View
Your comments
28 July 2024 2,822 2 View
I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose
25 July 2024 438 3 View
Novel areas especially
24 July 2024 8,416 0 View
I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...
23 July 2024 4,074 2 View
I have immunized BalB/C mice with a protein using the intradermal (ID) method with Complete Freund's Adjuvant (CFA) and Incomplete Freund's Adjuvant (IFA), following a 14-day interval and three...
22 July 2024 9,160 2 View
Dear Participants- Faculty and Researchers from Pakistani Higher Education Institutions, Thank you for participating in research study that aims to 'Analyze Individual and Institutional Factors...
18 July 2024 7,024 1 View