For coaxial fed patch antenna what are the ways to suppress higher order frequencies or make the second, third order frequencies to move further away?
Greetings, i would suggest that selecting appropriate feeding location itself suppresses higher order modes in coaxial probe fed patch.
Put shorting pins in places where the electric field is zero for the mode you want.
Hi all. Is it possible to correlate multiple parameters like fruit weight, color, length and diameter, its ratio with water content in coconut ?. Need some guidance on some non destructive methods...
23 July 2024 9,421 3 View
we got many peaks, actually graphene oxide have the first peak in 10.06 (2Theta), is that GO formed? or if not what is the reason?
11 February 2023 2,222 4 View
I am designing a patch antenna using coax feed in HFSS. I read in posts that dimensions of radiation box should be more than lambda/4 from the edges of the radiating structure. So I did like that...
17 January 2023 9,053 7 View
I am designing a patch antenna with coax feed for 3GHz frequency. While assigning radiation box the height of the box needed to be assigned I found it should be above lambda/4 which was around...
06 January 2023 541 4 View
My professor asked me to replace normal ground plane with infinite ground palne and compare between them for a patch antenna. I don't know how to add a infinite ground plane in CST can somebody...
21 December 2022 6,840 3 View
I want to reduce the size of the graphite charcoal from micro size to nano size for that, I decided to use the ball milling equipment. Because of sample is powder, they need a cooling medium for...
19 October 2022 7,696 6 View
Consider torrents is used to share packets to user in demand. How can we safeguard this process without involving unnecessary monitoring by ISP's?
26 July 2022 1,951 3 View
Actually I have PDMS, it clear and highly viscous in nature, so what can I mix with it to mould them to sheets of 0.5mm thickness. Please also let me know the method that I can use for curing.
10 May 2022 9,600 3 View
I'm using silicone resin for paint formulation (zirconia as a filler material) and It doesn't cure at atmosphere and elevated temperature also. And I tried titanium 4 isopropoxide, it dried but...
24 January 2022 5,484 3 View
Geopolymer concrete research by using Na2sio3 or k2sio3 powder
01 January 2022 6,330 3 View
I want to reduce simulation time in CST for frequency domain solver by upgrading my computer. I already have discrete GPU but it doesn't seem to make any difference at all compared to integreted...
10 July 2024 2,789 4 View
What is Differential-Fed in microstrip patch antenna ? How it is design in CST studio? What is simulation process and procedure to do Differential-Fed in CST studio ?
08 July 2024 7,464 1 View
How to know the TM/TE modes in antenna design in CST studio? Example: TM01 ,TM02 ,TM10, TM12, TM30 like this... how can identify the antenna is operate the above said mode? can any one explain...
08 July 2024 6,609 2 View
I want to simulate square loop fss with antenna so that it can work as a filter . how to simulate it in HFSS
29 June 2024 4,840 1 View
Do you have any suggestions to illustrate the antenna design effectively except for CST, HFSS, FEKO, and Matlab?
24 June 2024 3,381 3 View
We want to do qPCR from single cells extracted from patch-clamp recordings. As the RNA content of each cell will be very small and to prevent further degradation, i will not quantify it, instead...
11 June 2024 7,116 0 View
We are an electrophysiology lab out of Milwaukee. Recently, due to ice buildup, a small crack in the door of our -20 freezer resulted in all of the freezers contents reaching room temperature...
06 June 2024 2,234 1 View
I'm studying hippocampal pyramidal and granule cells in coronal mouse brain slices using patch-clamp. I use mixed NaCl/sucrose ACSF for cutting (ice-cold) and recovery (30 min at 35-37 °C), 0.5...
30 May 2024 3,472 1 View
Hello. I moved to a new lab. My IP solution, which I used at previous labs, stopped working. I can not hold a cell for more than 5-7 minutes, then leak current increases dramatically and I lose...
29 May 2024 2,291 4 View
I've recently started to patch dentate gyrus granule cells in coronal mouse brain slices (300 μm). I'm using mixed NaCl/sucrose ACSF for cutting (ice-cold) and recovery (30 min at 35-37°C) and...
27 May 2024 3,688 1 View