Dear SWAT users,

I have a big problem with two conservation practice in SWAT model: Grassed Waterway and Filter Strips.

I wanted to use Grassed Waterway or Filter Strips in a SWAT model. I added a new Grassed Waterway and Filter Strips operation in SWAT Editor Version 2012.10_7.23 released 6/29/20 -> Edit SWAT Input -> Subbasin Data -> Operations (.ops). After setting up the above operations, I turned on Re-write SWAT input files. But after turning on the SWAT (64-bit release) simulation, the results are the same as before using the above operations. Do you have to turn on anything else in the model for these operations to work? I would be very grateful for your help.