First, the system error code 1073741819 error is a Windows error exit code, not ABAQUS. The cause of the error is a memory conflict, such as a program attempting to enter memory that is not allowed to enter.

So, ABAQUS reports this error for a number of reasons. Here are a few of them, sorted by likelihood:

The model is too large and the memory is not enough;

Modeling problems, the model passed pre-processing (pre.exe), but there is no ditch in standard.exe. The problem is not the problem of grammar, but the physics of the model is not established (such as boundary conditions, material definitions, etc.);

Unlike the CPU structure, you can modify the .dll file name. This is also mentioned in many answers. This is not the case if you are using the latest version of ABAQUS and a computer;

So how do you deal with this problem? Here are the steps:

Run a simple model to see if it works?

If not, change the .dll file. Rename mkl_avx2.dll to mkl_avx2.dll. 14.0.0.4. I am using ABAQUS14-4. If you are using ABAQUS13, it changed mkl_avx2.dll. 13.0.0.1. To see if successful, if successful, that is the version of the problem, if not successful, you can try reinstalling ABAQUS or by system check;

Reduce the mesh density and re-run. If it succeeds, it is not enough memory, you can use a more powerful computer or have a grid;

If you reduce the mesh density, it may be a problem with the model. Check collections, material definitions, boundary conditions, initial conditions, etc.

https://zhuanlan.zhihu.com/p/56255661

Abaqus Standard solver .exe file got corrupted, take the same file and try to run it in any other machine. or you can re instal Abaqus and run this, it will solve.

Thanks

Hi Amogh Shejwal

Try the following :

Rename mkl_avx2.dll to mkl_avx2.dll. in the C:Simula/Abaqus/Version/code/bin directory to mkl_avx2.dll. (old version).0.0.1.

As example : if you are using Abaqus 6.13 then you have to rename mkl_avx2.dll to mkl_avx2.dll. 11.0.0.1