Hello, I'm am working on a liquid crystal antenna for my thesis work. I was trying to use this liquid crystal (LC) mixture GT7-29001 from Merck KGaA, Dramstadt, Germany.
From a research paper, I found the following information - GT7-29001 is an LC optimized for high-frequency band applications, and two dielectric constants were ε⊥ = 2.45 (tan δ⊥ = 0.0116) and ε∥ = 3.53(tan δ∥ = 0.0064) at 19 GHz, respectively, according to the datasheet provided by the Merck KGaA.
Please tell me if anyone can help me to -
- Get the datasheet provided by the Merck KGaA (I tried searching for it in internet but couldn't find it).
- To simulate this mixture as a substrate in any simulation software (HFSS, CST, ADS, MATLAB).
Dear Md. Sadman Sakib Chowdhury Manjur Md. you need to choice in HFSS Properties the option My Material and edit dielectric constants ε⊥ = 2.45 or ε∥ = 3.53 (in depending on signal polarization). Also you need to use as the calculations frequency 19 GHz. It will be enough for your simulation.
Hello,
If the simulation software is CST, then in material selection for substrate, select new material and then fill the properties of GT7-29001 like permittivity, conductivity, loss tangent etc.
For properties of material, one paper is attached.
Thanks,
- Badges
- Science topic
- Similar topics
- Mathematical Sciences
- Graphs