Hi Sajjad,

I have attached Chapter 3 and 6 of Wind Energy Explained, you will find useful information on the families of airfoils for wind turbine blades and their selection.

I also included an airfoil catalogue for wind turbines  

Hi Sajjad,

I have attached Chapter 3 and 6 of Wind Energy Explained, you will find useful information on the families of airfoils for wind turbine blades and their selection.

I also included an airfoil catalogue for wind turbines  

Hi . you can go for standard NACA aerofoils. You can have  very nice optimized profile, but it takes lot of time to achieve optimum  shape.

Basic  thumb rules from book by Tuzson etc should be enough .

regards

Rohit

Thank you so much.

Research that we did at RPI has looked at using an S809 airfoil to model a wind turbine blade.  I'm not sure if that is necessarily the best or worst for your applications, but I am at least under the impression that it is a standard, representative profile.

Please follow my earlier post regarding about airfoil selection thts ill be give an overview about airfoil choice.

https://www.researchgate.net/post/How_can_I_calculate_the_camber-chord_and_thickness-chord_of_an_airfoil

Go through book Wind Energy Explained

You can find and read Richar Eppler's book about airfoil design and data

Hello, Which NACA model could be used for HPT first stage turbine?

Hi , you can go for NACA series , you will have many optimization airfoils.

regarda