I want to model the behaviour of ths attached image 1, as a plane rectangular element (image 2). What is the best approach to represent it? speciallly to correctly represent the deformations, rotations correctly?
How to get the plastic hinge properties (Backbone curves) for steel sections according to Australian code rather than using the FEMA 356 guidelines?
10 November 2017 8,800 0 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...
05 August 2024 9,637 2 View
Hi everyone I need a file with a dirty and clean potato image
04 August 2024 7,199 4 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
Dear researchers. I tried using the IHC PROFILER in image j to quantify nuclear DAB staining. I followed the instructions in the original article by "Varghese F, Bukhari AB, Malhotra R, De A...
29 July 2024 2,229 0 View
My question pertaining to the DAB staining in cytoplasm of human oral squamous cell carcinoma tissue. When quantifying the epithelial cancer cells do we have to crop remove the stromal tissue?...
29 July 2024 2,682 6 View
In hirshfeld surface calculation i did not find any red spot in hirshfeld surface, is it ok for research article to write?
28 July 2024 2,988 0 View
In my molecule there is Chloro group at 2-position of phenyl ring, but in 2D image it appears as methyl showing no interaction.
28 July 2024 734 0 View
The above are manually labeled extrinsic matrices based on the first image It can be seen that the projection error at the edge is large, while the error at the center is small. What could be the...
23 July 2024 7,479 3 View
I have used 30 years of daily data, but the model is not able to optimize, getting just 0.57 in NSE and R2. when I reduced the data to 20 years in daily time frame I got 0.73 in NSE, R2 for both...
22 July 2024 669 0 View