We use 4A zeolite molecular sieves in refrigeration application. now we want to regenerate this sieve in simple muffle furnace? what will be regeneration cycle. Please suggest most simple way.
details information of sieve is attached.
see about 4A regeneration
http://www.sigmaaldrich.com/chemistry/chemical-synthesis/learning-center/technical-bulletins/al-1430/molecular-sieves.html
Dear Mr. Mushtaq,
Thank you. But how much time do we need to hold at regeneration temperature and what will be the cooling rate?
there is no indication about that.
Regenerate 4A molsieve at ~250 deg-C. How long you need to regenerate it for depend on the amount of moisture/water adsorbed on it.
In a lab setup you can weight your sieve every 1 to 2 hours. When the reach a constant weight stop and cool it down gradually.
Keep in mind the sieve will lose some of its activity after regeneration.
Thank you Wahib Alabdallah
Hello Everyone, I have a questionnaire of a 3-point Likert scale for an overall evaluation for a service, and several detailed attributes evaluation of that service. For example: Overall...
31 January 2021 9,612 8 View
I have a data set of 5 countries for 30 years and i want to analyse the relationship between y and x in panel setting. However, the countries are not similar in nature moreover. one country is...
30 January 2021 6,564 4 View
I am trying to dissolve Magnesium triflate in methanol. I took 2.6 g of it in about 20 mL methanol. After thorough stirring, I can see suspended particles! Can anybody throw some light on its...
12 January 2021 6,481 2 View
I am trying to switch from NaCl to KCl in my buffer. As soon as I add 4M KCl solution to DI water and HEPES, it precipitates. Would heating the buffer alleviate the problem? Or should i add KCl to...
07 January 2021 1,104 1 View
I am trying to simulate a flexible antenna on ANSYS HFSS. Here, I have used "PDMS" as a substrate and "pec" as a probe (inner conductor) of a coaxial feeding. But during simulation, it is showing...
24 November 2020 800 5 View
My plan is to fabricate a conformal microstrip patch antenna. I am going through the simulation works first. I already simulated the planar antenna. Now I am trying to simulate it with different...
19 November 2020 2,961 2 View
Please suggest types of literature to look for? Recommend journals which focuses on these issues.
12 October 2020 2,878 4 View
1. What type of literature should I read for writing a successful concept note? 2. Is there any literature which will help me decide a research question/objective for designing a study will be...
12 October 2020 3,363 5 View
05 October 2020 3,241 13 View
I am experienced with the antenna simulation using ANSYS HFSS and CST. But now I am working in an additive microsystems lab and want to move to 3D shape antenna simulation and printing.
03 August 2020 2,184 3 View
How to calculate the RMSD values for a MD simulation using MOE?
07 August 2021 0 0 View
When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.
16 June 2021 0 0 View
I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...
03 March 2021 4,116 4 View
Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...
03 March 2021 5,978 5 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !
02 March 2021 5,785 3 View