Simulation of solar assisted solid desiccant cooling system.
There are example files within the TRNSYS folders what came with the installation.
I would recommend posting this questions on the TRNSYS list-serv to get more feedback.
I agree with Fred. You can also go through the TRANSYS manual for more information. Check the links below.
http://web.mit.edu/parmstr/Public/Documentation/01-GettingStarted.pdf
http://www.trnsys.com/assets/docs/03-ComponentLibraryOverview.pdf
Thank you Fred Betz sir and Samba Sowe sir for your valuable feed back.
Mathematical model of desiccant dehumidifier.
07 August 2019 7,087 8 View
Simulation of desiccant based air conditioners.
01 February 2019 1,989 4 View
Simulation of desiccant wheel.
01 February 2019 3,169 4 View
Artificial neural network.
31 December 2018 958 8 View
ANN.
31 December 2018 5,904 0 View
31 December 2018 1,236 0 View
Optimization of desiccant wheel.
31 December 2018 5,001 8 View
31 December 2018 2,515 0 View
Simulation of air conditioning
31 December 2018 2,779 1 View
31 December 2018 5,872 0 View
The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...
03 March 2021 5,857 3 View
Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...
03 March 2021 961 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...
02 March 2021 2,246 2 View
I am thinking about working on solar furnace with heliostats that concentrate sunlight and heat molten salt, but currently no luck with research. Not a lot of papers based on the subject. (check...
01 March 2021 5,023 5 View
Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...
01 March 2021 2,622 3 View
I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...
28 February 2021 1,638 3 View
I have a doubt on how to select the inductor and capacitor value when I want to implement MPPT controller. This is because we always take a maximum output voltage and current but in this case, we...
28 February 2021 3,637 2 View
I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...
27 February 2021 8,128 1 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View