Generally, there are different technique for fabrication of laminated composites. It is generally you have to manufacture. Otherwise some laminated composites composite manufacturer you can get. As per your requirement they can manufacture the laminated composites. The manufacturing processes are: Processes:

Hand Lay-up

Pre-preg forming

Pressure molding

Vacuum bagging

Filament winding

Pultrusion

Spray method

Sheet molding

Bulk molding

Resin transfer molding....You can get details information from different composite related book. In IITKGP, IIT Guwahti and some other IIT also have composite manufacturing lab..

HAND LAY UP METHOD IS SIMPLE WITH 4 OR 5 TRIALS YOU CAN MASTERED IT

Dear Piyush,

I think your question is about prepregs also . These prepregs are pre- impreginated fabrics. The resin is already present in the fabric, in uncured condition, you have to do the cutting , layup, vaccum / pressure and heat the layup so that the excess resin is bled out and you get a laminate of high fiber volume fraction( approx 60 to 70 percent). 

thank you everyone for  your guidance...

Hi,

Regarding prepregs, if you can't fabricate it yourself (there is quite a lot of equipment required), you can just buy the roll and make it fabricate by others. You will need to indicate the prepreg reference, dimensions and the fabrication sequence. Some laboratories offer the fabrication service. There is one in my company. I can provide more details if necessary.

BR