I want to know what techniques can I use and what would be the best solvent for powdered silicon oxide nano-particles for injecting in the LC sandwich.
I have just started working on fpga and as a task I need to establish communication between 2 basys 3 (xc7a35tcpg236c-1) boards using usb uart bridge. What should be my approach for this? Like for...
05 May 2024 447 0 View
Role of activator and sensitizer and how we select their concentration?
23 March 2024 860 2 View
I have doped Er as activator and Yb as sensitizer in a borate host polycrystalline material
22 March 2024 3,854 3 View
He H CO2, were analysed using thermal conductivity detector (TCD) equipped with 2 HayeSep pre-column and an MS5A, whereas C1–C8 hydrogenations were detected using a flame ionization detector (FID)...
11 January 2024 9,830 0 View
I have increased expression of STAT3 in multiple sclerosis (MS) patients as compared to controls. Can Extavia be used as an inhbitor against STAT3 in MS patients? Will it be beneficial to stop the...
25 October 2023 3,008 0 View
I am working on diheme with using basis set 6-31g** for C, N, O and LAN2DZ for Fe and Ni. When I submitted the job, it stopped by showing the error " Failed to open execfile". Anyone please help...
03 July 2023 7,591 1 View
Is there any other material than BSA that could be used for the fouling analysis of polymer membrane when it is used for the emulsion separation experiment? What is the reason behind selecting...
17 April 2023 6,970 0 View
Hdfs data at rest encryption on hadoop
09 February 2023 2,452 1 View
I have found a significant gene (BIRC5) between lung cancer tumor and adjacent normal samples. In the literature, it is mentioned that BIRC5 (an anti-apopotic gene) is generally upregulatd is most...
08 December 2022 2,416 1 View
Currently I started to learn MD simulations of various drugs with CYP 450. Please anybody help which software is more convenient Desmond or GROMACAS?
25 April 2022 8,038 4 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
Are there any suggestions or insights you can provide to help address this problem
06 August 2024 1,443 2 View
I work on MCF7 cell cell for anticaner purpose and I wa to do drug preperation the drug ( secondary metabolites extracted from Aspergillus) My question which solvent is better with these secodary...
03 August 2024 4,725 2 View
I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...
03 August 2024 6,500 3 View
Hello everyone, I need to dissolve stigmasterol for an animal experiment, but it hasn't dissolved in either DMSO or vegetable oil. Can anyone recommend the best solvent for stigmasterol?
01 August 2024 7,504 2 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
AGILENT HPLC 1100 SERIES operation assistance needed.
25 July 2024 10,045 2 View
Why methanol and sulphuric acid, used in the analysis of polyhydroxyalkanoates (PHA) methyl esters by GC-MS? Additionally, why do we typically use non-polar solvents in GC-MS?
22 July 2024 1,210 2 View
Is it the best optimization ratio based on experiments?
22 July 2024 8,170 0 View